Hello everyone and thanks for your help in advance. I am upgrading from Exchange 2003 to Exchange 2013 and need to transfer approximately 40 mailboxes. Each user has local OST files on their client machines. I know there is no direct
upgrade from 2003 to 2013 and would prefer to do a new install rather than upgrading to 2010 then to 2013. I know I can use a third party converter to convert the OST to PST, then import them to Exchange. But I was wondering what would happen if
I performed the new install, then set up the new mailboxes for each user on the new Exchange box, then connect the users. Will the local OST files populate the Exchange mailboxes? Or will Exchange overwrite the local OST files with blank data?
Or will nothing happen. Any insight would be greatly appreciated.
↧
New Exchange 2013 Install with OST files
↧
Error of Get-EngineUpdateInformation in Exchange 2013
Anti Malware has been enabled during Exchange 2013 installation, but it shows "The term Get-EngineUpdateInformation is not recognized as the name of a cmdlet" when input command Get-EngineUpdateInformation, any suggestion?
↧
↧
Exchange 2013 Anitispam and Anti-Malware
In Exchange 2013, does anti spam agent work with Mailbox server?
If yes, can I enable anti spam agent on a server running both Mailbox and Client Access Server?
↧
Errors installing -- Schema Admin, Containers
I downloaded Exchange 2013 Eval from technet but it failed trying to setup Mailbox role, I checked the version and it was RTM so I downloaded CU 9, after uninstalling and trying to install CU 9 I get errors at the prerequisite check and while trying to perform /preparead or /prepareschema:
the AD schema isn't up-to-date and this user account isnt a member of the "Schema Admins" and/or "Enterprise Admins"
Setup encountered a problem while validating the state of AD: Couldnt find the Enterprise Organization container.
I am logged in as domain/administrator and that account IS both a schema and enterprise admin. It seems to happen when you uninstall and resinstall after a failed installation as I was able to get further when installing for the first time...previously on the RTM release I had the same issue and wound up reinstalling exchange (new server) but got the Mailbox installation failure so I downloaded CU9 -- Exchange is on the same server as I've been asked to make it that way since they are only 10 users and have been using Exchange 2003 for years with AD on the same old server (they don't use AD though just WORKGROUP).
↧
Hybrid Deployment Questions
Hi
Just a question one of our customers have currently 1 x cas and 2x mbx servers with a kemp loadbalancer. We are planning a hybrid exchange. I was going to install a new server cas+mbx to use has a regular cas server for HA and for hybrid deployment. My understanding is that i only need to add a new url for ex : hybrid.mydomain.com. Is this correct? By doing this it will still act as a cas and hybrid server correct?
Thanks in advance
↧
↧
Exchange 2013 Migration, possibility to proceed with "NTLM" authentication in Outlook Anywhere
I m in the migration process of exchange 2010 (SP3 RU5) to exchange 2013 (sp1).
Following "Exchange Server Deployment Assistant" of technet.
Just completed installation of MBX2013 and CAS2013 servers on same subnet and configured virtual directories and installed certificates.
Not yet moved the arbitration mailbox.
Outlook anywhere has already enabled with "NTLM" authentication for all Outlook users .
Deployment Assistance advised to run bellow command in step of "Enable and Configure Outlook anywhere".
Enable-OutlookAnywhere -ClientAuthenticationMethod Basic -IISAuthenticationMethods NTLM, Basic.
This will impact to experience of all outlook users, which they will prompt password when open outlook. And cannot accepted by our environment.
I need to get your advice on,
1. Can i proceed migration with NTLM authentication?
2. What sort of Issue can be expected and solutions?
↧
SSL Certificate for internal OWA and Outlook w/ CNAME
Our users access OWA using a cname record webmail.domain.local Our Outlook use the actual server name servername.domain.local I'm a little confused when it comes to creating the SSL certificate using our existing internal certificate server. When I run
through the wizard to generate a certificate request on exchange should I put the actual server name in the OWA URL or the CNAME or since I have a CNAME record do I need both on the certificate and have to generate it some other way? Thank you for any ideas.
↧
What URL should be used for Outlook Anywhere when enabled on a Public Folder (legacy), from 2013?
After several calls with Microsoft, a ROSS, and several other engagements, we have the following configuration below.
Goal
Each DAG (Exchange 2013, and 2010) has 4 members, two in each site. Assume that the cluster resource is in the respective "active sites". Public folders are on Exchange 2010/Legacy
Clients
Outlook 2007, cached and non cached mode and newer. Some are on-network, some are off network
New York Subnet: 10.10.15.x
Autodiscover: autodiscover.contoso.com
DAG Name: NYCDAG , No Cluster Administrative point
RPC setting on all Exchange 2013 databases: NameOfA2013Server.contoso.com
RPC setting on all Exchange 2010 databases: old2010RPC.contoso.com
ClientAccessArray: old2010RPC.contoso.com
Internal URLs and External URLs for all Virtual Directories (2013 servers)
https://NYCCAS.contoso.com/x (x is OAB, EWS, OWA,
Note- we did have an ambiguous namespace where Autodiscover URL, and the RPC name were the same. This has been corrected.
Public Folder server PF01: OutlookAnywhere is enabled, and has a name of PublicFoldersNYC.contoso.com. 1:1 NAT available to outside
Exchange 2010 CAS Array: OutlookAnywhere is enabled and has a name of Legacy2010.contoso.com. 1:1 NAT available to outside.
San Francisco: 10.5.5.X
Autodiscover: autodiscover.contoso.com
DAG Name: SFDAG (stretched DAG with NYC). No Cluster Administrative point
Internal URLs and External URLs for all Virtual Directories
https://SFCAS.contoso.com/xxx
2010 Public folders, CAS not yet configured.
Is it strange that we have 3 OutlookAnywhere endpoints in the NYC site? What is the preferred configuration?
↧
The specified ShellId is incorrect or the shell no longer exists on the server.
Hi,
I have been looking of a solution of this problem, that started from a new installation of Exchange 2013 (CU8 installed).
I get this errors after 30 seconds in (run as admin) management shell.
Starting a command on the remote server failed with the following error message :
[ClientAccessServer=SERVER,BackEndServer=server.xxxx.com,RequestId=9d3d4900-3e71-4344-b607-72c54351ec3e,TimeStamp=8/16/2015 1:57:55 PM] [FailureCategory=WSMan-InvalidShellID] The request for
the Windows Remote Shell with ShellId B39DBE1D-CED0-4F26-A8AE-8AB7F939E8F4 failed because the shell was not found on the server. Possible causes are: the specified ShellId is incorrect or the shell
no longer exists on the server. Provide the correct ShellId or create a new shell and retry the operation. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OperationStopped: (server.xxxx.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName : server.xxxx.com
Sofar I found this problem listed in an MS article about language cookies, solved with CU3.
↧
↧
Microsoft Exchange Warning
I have moved all the exchange 2007 mailboxes to exchange 2013 but i can see WARNINGS in EXCHANGE 2007 CONSOLE, SHOULD I IGNORE THESE AND PROCEED FURTHER
Microsoft Exchange Warning--------------------------------------------------------
Warnings
get-recipient
Completed
Warning:
Object mydomain.com/Users/DiscoverySearchMailbox {D919BA05-46A6-415f-80AD-7E09334BB852} has been corrupted and it is in an
inconsistent state. The following validation errors have occurred:
Warning:
The value of property 'RecipientTypeDetails', 536870912, is not defined in the Enum type 'RecipientTypeDetails'.
Warning:
Object mydomain.com/Users/SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} has been corrupted and it is in an inconsistent state.
The following validation errors have occurred:
Warning:
The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
Warning:
Object mydomain.com/Users/SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9} has been corrupted and it is in an inconsistent state.
The following validation errors have occurred:
Warning:
The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
Warning:
Object mydomain.com/Users/SystemMailbox{1f05a927-ad21-4b9b-bf84-687b2d66b105} has been corrupted and it is in an inconsistent state.
The following validation errors have occurred:
Warning:
The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
Warning:
Object mydomain.com/Users/FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 has been corrupted and it is in an inconsistent state.
The following validation errors have occurred:
Warning:
The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
Warning:
Object mydomain.com/Users/Migration.8f3e7716-2011-43e4-96b1-aba62d229136 has been corrupted and it is in an
inconsistent state. The following validation errors have occurred:
Warning:
The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
↧
Season Hyperd between Exchange sserver 2013 and Office 365
Dear,
I have an hyperd exchange server 2013 with office 365, and it's working fine
now I want to cancel the office 365 and keep just Exchange server 2013,
what are the process steps that I need to do it,
Many thanks,
↧
Recover from Failed Install
I had deployed an exchange server that needs to be removed, however the uninstall fails and the reinstall fails ... see below.
Error while running uninstall:
Error while running install:
Steps taken:
I have attempted running from installation media cmd setup.exe /m:RecoverServer (on the server in question) with the result being a command windows opening and closing and no change to the server.
↧
Exchange 2013 Readiness Check Error
I have been trying to install Exchange 2013 for a while now and have continued to run into the same error during the readiness check. The readiness check stalls at 40% completed and I receive the following error:
Error:
The following error was generated when "$error.Clear();
if (Get-Service MSDTC*|?{$_.Name -eq 'MSDTC'})
{
Set-Service MSDTC -StartupType Automatic
Start-SetupService -ServiceName MSDTC
}
"was run:"The task failed because a Win32 error occurred: "Access is denied". Could not open the service "MSDTC".".
I have tried to install this both onto Windows Server 2008 R2 as well as Windows Server 2012. I have installed all of the prerequisites as noted in the Microsoft documentation. I have tried to install this as the first Exchange server in a brand new AD environment as well as trying to install it into an AD environment where I had already installed Exchange Server 2010 with SP3. I always receive the same error message during the readiness check when it stalls at 40%.
Any help here would be very much appreciated.
Thank you.
↧
↧
Action of malware detected in Exchange 2013
In Exchange Administrative Center of Exchange 2013, the configuration page of anti-malware policy only provides options to delete entire message or attachment for action of malware detected. Is there any option for quarantine, just
in case of false positive.
↧
Cross Forest Free / Busy Ex2010 > Ex2013 only working one way
Hi,
I hope someone will have seen this before as it is driving me mad, just setting up cross forest free / busy between Exchange 2010 and 2013, lookups work 2013 to 2010 but not 2010 to 2013.
I have double triple checked everything, DNS, Certs, Autodiscover, access to EWS etc and it all looks good but it still doesn't work. This is the first time I've tried this to Exchange 2013 so I may be missing something but I can't see what..
I found this but is has not helped either! https://support.microsoft.com/en-us/kb/3010570 as I am using DNS and not SCP.
Any help greatly appreciated.
↧
Exchange 2007 decom after Exchange 2013 installation
Afternoon,
We have installed exchange 2013 and it has been running successfully for a while. We are at the point where we would like to decommission the exchange 2007 environment, but I am having issues.
When I run the setup.com /mode:uninstall /removecms /cmsname:xxxx i get an error about the public folder replicas.
When I try to run the moveallreplicas.ps1 i get another message
'There is no existing
Publicfolder that matches the following: '\'
It seems that this is a product of being having both 2007 and 2013 in the environment. The organisation has not used public folders for years so getting rid of them is not a problem.
What is the best way forward as I need to decommission the old Environment ASAP!
Thanks for any assistance!!
↧
how can i delete/uninstall my exchange 2013 Server after Migration to office 365
Hello,
i'm kind of stuck after migrate all of my mailboxes to office 365 about what to do with my on premise Exchange 2013.
now i have the following situation :
All my mailbox have been migrated from Exchange 2013 to exchange online, my AD is Dyrsinced and all flows are going through office365.
My on premise server is turned off since about a month and everything is going well.
i don't want to keep my on premise Exchange Server like is recommended by microsoft since i can manage what i want with AD Attributes and Powershell.
so can i uninstall the on-prem exch without worries ? since this will delete some exchange attributes on my users, how my office365 mailboxes will react? what is the best thing to do?
thanks by advance for your help !
↧
↧
Autodiscover setup for Internal and External Domains
I have an Exchange installation that is giving me issues. The server was migrated from an old SBS system into a standalone exchange server. All exchange services are supported by a single server.
The issue is that when an internal client connects to the server a SSL error occurs, every time. (See Below)
Any input is appreciated.
Some other points:
- The Active Directory is a .local domain while the Email Addresses are .com
- A certificate was purchased for the .com domain (OWA Access)
- The Server is a member of the domain
↧
Event ID 5003 Source MSExchangeIS
Hello All ,
I recived the error Event ID 5003 Source MSExchangeIS below on Exchange 2013 how can solve the issue.
Log Name: Application
Source: MSExchangeIS
Date: 9/3/2015 8:46:12 AM
Event ID: 5003
Task Category: Directory Services
Level: Error
Keywords: Classic
User: N/A
Computer: Mbx01
Description:
Microsoft Exchange Information Store service has encountered a permanent error while reading information from Active Directory. Details:
Microsoft.Exchange.Server.Storage.DirectoryServices.DirectoryInfoCorruptException: ErrorCode: ADPropertyError, LID: 43420 - RecipientType SystemMailbox is invalid for MailboxGuid .
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.CreateMailboxInfo(IExecutionContext context, ADRecipient adRecipient, MailboxGuidType mailboxGuidType, Guid mailboxGuid, IADTransportConfigContainer transportConfig, IADOrganizationContainer
organizationContainer, Boolean tenantMailbox)
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.LoadMailboxInfoByGuid(IExecutionContext context, TenantHint tenantHint, String domainController, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.GetMailboxInfoHelper(IExecutionContext context, TenantHint tenantHint, String domainController, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.GetMailboxInfoImpl(IExecutionContext context, TenantHint tenantHint, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.DirectoryServices.DirectoryBase.GetMailboxInfo(IExecutionContext context, TenantHint tenantHint, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.MapiDisp.MailboxCleanup.GetMailboxInfoFromAD(Context context, TenantHint tenantHint, Guid mdbGuid, Guid mailboxGuid, MailboxInfo& directoryMailboxInfo).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeIS" />
<EventID Qualifiers="49156">5003</EventID>
<Level>2</Level>
<Task>5</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-09-03T05:46:12.000000000Z" />
<EventRecordID>4026114</EventRecordID>
<Channel>Application</Channel>
<Computer>MBX01</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.Exchange.Server.Storage.DirectoryServices.DirectoryInfoCorruptException: ErrorCode: ADPropertyError, LID: 43420 - RecipientType SystemMailbox is invalid for MailboxGuid 6547a88b-872e-4f58-bad5-e958c6df161f.
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.CreateMailboxInfo(IExecutionContext context, ADRecipient adRecipient, MailboxGuidType mailboxGuidType, Guid mailboxGuid, IADTransportConfigContainer transportConfig, IADOrganizationContainer
organizationContainer, Boolean tenantMailbox)
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.LoadMailboxInfoByGuid(IExecutionContext context, TenantHint tenantHint, String domainController, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.GetMailboxInfoHelper(IExecutionContext context, TenantHint tenantHint, String domainController, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.DirectoryServices.Directory.GetMailboxInfoImpl(IExecutionContext context, TenantHint tenantHint, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.DirectoryServices.DirectoryBase.GetMailboxInfo(IExecutionContext context, TenantHint tenantHint, Guid mailboxGuid, GetMailboxInfoFlags flags)
at Microsoft.Exchange.Server.Storage.MapiDisp.MailboxCleanup.GetMailboxInfoFromAD(Context context, TenantHint tenantHint, Guid mdbGuid, Guid mailboxGuid, MailboxInfo& directoryMailboxInfo)</Data>
<Binary>5B444941475F4354585D000024000000FF0B0000000000000002080000009CA9401072090000</Binary>
</EventData>
</Event>
↧
install Exchange 2010 and 2013
in a forest, I am going to install Exchange 2010 and 2013, coexistence environment.
After researching, I need to first install Exchange 2010, and then install 2013. right?
Pls give me some instructions about the process, related blogs or articles are appreciated
After researching, I need to first install Exchange 2010, and then install 2013. right?
Pls give me some instructions about the process, related blogs or articles are appreciated
↧