I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server. I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online). I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me). Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.

Issue 1)

After each reboot I get a Kernel-EventTracing 2 error.  I cannot find anything on this on the internet so I have no idea what it is.

Session "FastDocTracingSession" failed to start with the following error: 0xC0000035

I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.

Issue 2)

I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:

https://support.microsoft.com/kb/2870416?wa=wsignin1.0

One of the perf counters fails to register using the script from the link above.

66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml

New-PerfCounters : The performance counter definition file is invalid.

At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4

+    New-PerfCounters -DefinitionFileName $f

+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo         : InvalidData: (:) [New-PerfCounters], TaskException

    + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:

   12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters

But that one seems unrelated to the ones that still throw errors.  Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):

Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.

   at System.Diagnostics.PerformanceCounter.InitializeImpl()

   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.

   at System.Diagnostics.Process.GetProcessById(Int32 processId)

   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.

   at System.Diagnostics.PerformanceCounter.InitializeImpl()

   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.

   at System.Diagnostics.Process.GetProcessById(Int32 processId)

   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.

   at System.Diagnostics.PerformanceCounter.InitializeImpl()

   at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.

   at System.Diagnostics.Process.GetProcessById(Int32 processId)

   at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Issue 3)

I appear to have some issues related to the healthmailboxes.  I get MSExchangeTransport 1025 errors for multiple healthmailboxes.

SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError

I reran setup /prepareAD to try and remedy this but I am still getting some.

Issue 4)

I am getting an MSExchange RBAC 74 error. 

(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.

Issue 5)

I am getting MSExchange Assistants 9042 warnings on both databases.

Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.

Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server. If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.

Issue 6)

At boot I am getting an MSExchange ActiveSync warning 1033

The setting SupportedIPMTypes in the Web.Config file was missing. Using default value of System.Collections.Generic.List`1[System.String].

I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hey

I have an Exchange 2007 server I am trying to migrate to Exchange 2013.  Every time I try to move a mail box from the 2007 box to the 2013 box i get this error:

Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00

Administrator
Failed

Error:
The address list service on the server 'MAIL.domain.local' is not running. An Exchange 2007 server on which an address list service is active cannot be found.

An Exchange 2007 server on which an address list service is active cannot be found.

Exchange Management Shell command attempted:
'domain.local/Users/Administrator' | move-mailbox -TargetDatabase 'Mailbox Database 111111111'

Elapsed Time: 00:00:00

I have rebooted and restarted the system attendent service.  Both servers are on the latest service packs and updates.

I migrated nearly 50 rooms.

One room makes trouble. On outlook 2010 and 2013 i got an auto response message. On outlook 2007 it is not working!

Alexander Rü

hi,

I have problem with the install process of Exchange 2013

I prepare all of the software prerequisits but in the middle of installing process it give me an error that I can't understand way it happened.

Error:
The following error was generated when "$error.Clear();
          install-MsiPackage -PackagePath $RolePackagePath -LogFile $RoleLogFilePath -UpdatesDir $RoleUpdatesDir -PropertyValues ("INSTALLDIR=`"" + $RoleInstallPath + "`" ESE=1");
        " was run: "Installing product C:\MsExchange13SP1\en\UMLanguagePack.en-US.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'The cabinet file 'EmbeddedFiles' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.'.".

the upper text is the error text

please help me

Microsoft Certified IT Professional Server Administrator

hi all,

So today, like an idiot, I decided to follow Microsofts advice which states that all customers with Exchange 2013 SP1 should update to CU7. So I did, and now my whole organization in dead. Now when I try to access OWA or even my desktop Outlook I get an error that the servers certificate is revoked. Im poking around IIS, but don't know it well enough to know what to do. When I test the connection settings on the default website or the OWA site I get this -

The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that <domain>\<computer_name>$ has Read access to the physical path. Then test these settings again.

My Echange Server self sighned certificate is valid, my owa certificate is valid. Everything was fine until I ran CU7.

I don't know IIS that well, and I don't know what to do. Any help would be greatly appreciated

Ric

Dear All,

I have an exchange organization comprized of single Exchange 2007 SP3 UR 15 running on Win2008 SP2 and two recently installed Exchange 2013 SP1 CU7 with CAS and Mailbox role running on Win 2012 R2.

Imidiantly after Exchange 2013 install, I am not able to login to Exchange 2013 EAC. When I enter my credentials domain\username, the EAC page simpli dose a quick refresh and I am back where I started.

I have tryid mutiple UTLs to access EAC page, such as:

https://localhost/ecp?ExchClientVer=15

https://localhost/ecp?ExchClientVer=14

https://localhost/ecp

Each of them show the same result, a page gets refreshet. I have tryid to move my Exchange Organization user mailbox to Exchange 2013 to see if that helps but the result.

I also noticed that OWA dosent work for mailboxes that are on Exchange 2013, they are redirected to Exchange 2007 even thou they are on Exchange 2013.

Any idea on this one?

Thank you

b.

Dear Microsoft Team

I have Exchange server 2013 SP1 and upgrade it to CU5 it is working normal

But wen I try to Upgrade it to CU7 I got this error massage

Error:
The following error was generated when "$error.Clear();
          $maxWait = New-TimeSpan -Minutes 8
          $timeout = Get-Date;
          $timeout = $timeout.Add($maxWait);
          $currTime = Get-Date;
          $successfullySetConfigDC = $false;

          while($currTime -le $timeout)
          {
            $setSharedCDCErrors = @();
            try
            {
              Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
              $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);

              if($successfullySetConfigDC)
              {
                break;
              }
              Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
            }
            catch
            {
              Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
            }

            Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
            Start-Sleep -Seconds 30;
            $currTime = Get-Date;
          }

          if( -not $successfullySetConfigDC)
          {
            Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
          }
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Best Regards

Rawa Zangana

Hey there

I have a Small Business Server 2011 with Exchange 2010 SP3 installed. As with the release of Exchange Server 2013 CU1 I want to migrate to 2013. I am following a technet blog post (http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx) to migrate Cross Org and Cross Forest. This is what I do:

Prepare-MoveRequest: works like a charm, user gets created in target forest and shows up in 2013 Mailbox Migration Console ("Migrate to this forest") in ECP.

Second I try to migrate the mailbox:

New-MoveRequest -Identity "DN or UPN of User in Target Forest" -RemoteLegacy -TargetDatabase "Mailbox Database Name" -RemoteGlobalCatalog"FQDN of Source DC" -RemoteCredential $remote -TargetDeliveryDomain "Target domain name"

The output is the following:

RemoteLegacy moves must involve Exchange 2010 or lower versions only.

I understand that this used to happen without SP3 and CU1, but why would I still get this message after upgrading? I also tried to move the mailbox from the other side (legacy exchange server):

New-MoveRequest -Identity "UPN" -Outbound -Remotehostname "TargetMailServer" -RemoteTargetDatabase "DB"  -RemoteCredential $remote -TargetDeliverydomain "domain"

Output is the following:

The remote server doesn't support client 'legacy exchange fqdn' version (14.3.123.2 caps:05FEFF). Missing functionality: 'TenantHint'.

This confuses me. SP3 should be 14.3.123.4 (which is the version for all server roles in EMC).

Any idea why this happens?

I had installed Exchange 2013 SP1 and it seemed to be working correctly. I installed CU7 and everything fell apart. Massive errors all over the place. I gave up and removed all mailboxes, removed the databases, and uninstalled Exchange 2013.  I then went into ADUC and manually removed the remaining system mailboxes.

I reloaded a brand new install of Server 2012 R2 (same name as previous exchange 2013 install) and I went to install Exchange 2013 again.  I ran it from the GUI and did not run /PrepareSchema or /PrepareAD in advance.  My understanding was that running the GUI would do this and since the prepare schema switch in particular is unnecessary since the schema was already updated from the previous install I did not worry about it.

Install fails with:

So yes the federated mailbox referenced above does not exist.  As I said I thought the install would have run the /PrepareAD steps and created it.  So I try and run the setup /PrepareAD myself to generate the system mailboxes and that fails:

PS C:\Users\administrator.mydomain.local\Downloads\Exchange2013cu7> .\setup /PrepareAD  /IacceptExchangeServerLicenseTerms

Welcome to Microsoft Exchange Server 2013 Cumulative Update 7 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Client Access role: Front End Transport service
Client Access role: Client Access Front End service

Performing Microsoft Exchange Server Prerequisite Check

    Configuring Prerequisites                                                                         COMPLETED
    Prerequisite Analysis                                                                             FAILED
     A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just thi
s role, or remove the role using Control Panel.
     For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InstallWatermar
k.aspx

The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.

So looking in the ExchangeSetup.log I find this:

[12/22/2014 23:32:27.0524] [1] User specified parameters:
[12/22/2014 23:32:27.0524] [1] Beginning processing Get-SendConnector
[12/22/2014 23:32:27.0587] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[12/22/2014 23:32:27.0587] [1] Request filter in Get Task: (&(objectCategory=msExchRoutingSMTPConnector)(|(&(msExchVersion<=1125899906842624)(!(msExchVersion=1125899906842624)))(!(msExchVersion=*)))).
[12/22/2014 23:32:27.0665] [1] Previous operation run on domain controller 'DC1.mydomain.local'.
[12/22/2014 23:32:27.0665] [1] Preparing to output objects. The maximum size of the result set is "Unlimited".
[12/22/2014 23:32:27.0696] [1] Ending processing Get-SendConnector
[12/22/2014 23:32:27.0696] [1] Evaluated [Rule:SendConnectorException] [HasException:False] [Value:"False"] [ParentValue:"System.DirectoryServices.ResultPropertyCollection"] [Thread:41] [Duration:00:00:09.9289411]
[12/22/2014 23:32:27.0696] [1] Finished [Rule:SendConnectorException] [Duration:00:00:09.9444335]
[12/22/2014 23:32:27.0712] [1] Evaluated [Setting:PowerShellExecutionPolicy] [HasException:False] [Value:"False"] [ParentValue:"<NULL>"] [Thread:45] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Finished [Setting:PowerShellExecutionPolicy] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Evaluated [Rule:PowerShellExecutionPolicyCheckSet] [HasException:False] [Value:"False"] [ParentValue:"<NULL>"] [Thread:45] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0712] [1] Finished [Rule:PowerShellExecutionPolicyCheckSet] [Duration:00:00:09.9445571]
[12/22/2014 23:32:27.0727] [1] Finished [Analysis:Prereq] [Duration:00:00:10.2101752]
[12/22/2014 23:32:27.0743] [1] Failed [Rule:InstallWatermark] [Message:A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just this role, or remove the role using Control Panel.]

Stuck.  Can't finish install, can't uninstall.

I should also mention. I have a working Exchange 2007 server in the environment. 

Hi Guys,

Most probably I am going to deliver one project in nearest future, which included to move Mailboxes and mail data from Novel Group-wise to Exchange 2013. i want to know what should be the approach and what are the per-requisites that need to be consider to perform Migration steps in above scenario? please let me know how the mail-flow work to/from Group-wise to exchange 2013 and vice-verse. please suggest me some initial steps and URLs for this requirement. i want to be clarified logically before i suggest any solution on this to my customer.

step by step docs will be more helpful to achieve this goal..

Regards,

Aanand Singh

We are updating our Exchange server from SP1 CU4 to CU7 and receiving the following error message.  

Get-OABVirtualDirectory settings appear correct so not sure where to look next.

Error:
The following error was generated when "$error.Clear(); 
          $BEVdirIdentity = $RoleNetBIOSName + "\OAB (Exchange Back End)";
          $be = get-OabVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          {
          new-OabVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController;
          }
          set-OabVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeOABAppPool" -Version:"v4.0";
        " was run: "System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.

Good Morning,

Have a question about the Certs. Does Exchange server have any issues with Wildcard Certs like Lync Server Edge does? Lync Edge server doesn't like Wildcard servers and it's not recommended to use them in the Lync Deployment. Is it the same for your external Cert for an Exchange CAS? I am currently upgrading our Exchange 2010 Hybrid CAS to Exchange 2013 and wanted to make sure I could use our WildCard Cert.

Thank in advance,

Aaron

I have moved all the exchange 2007 mailboxes to exchange 2013 but i can see WARNINGS in EXCHANGE 2007 CONSOLE, SHOULD I IGNORE THESE AND PROCEED FURTHER

Hi Members,

Presently i have an Exchange 2013 CU1 DAG with two mailbox servers running on Windows server 2012.

We need to upgrade our Exchange to 2013 CU7 with two mailbox servers in DAG running on Windows 2012 R2.

I have learnt that members of DAG should be of the same Operating system level,

is it possible that i can upgrade my Exchange 2013 DAG running on 2012 to 2012R2 ?

Kind regards

I tried installing service pack 3 on Exchange 2010 SP1 today. The setup went through all of the Readiness Checks with no problems. However, the setup process failed at Hub Transport Role. See below: It seems it can't find a certificate. I believe this has something to do with the recent certificate upgrade I needed to do. My original certificates were about to expire and I renewed them by running 'fix my network'. When I checked the app log, I found warning messages saying the certificate is about to expire. The thumb print matches the one in the error message. The error message I see now is
The Module DLL C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\exppw.dll failed to load. Event ID is 2280. Any ideas would be greatly appreciated.

Hello,

We're in the middle of a large public folder migration, but we have an error on which we cannot continue.

Our environment is large:

• 1,1 TB of data
• 22.000 folders
• 2,8 million messages
• Splitted over 63 PF mailboxes of 1 to 75 GB
• Splitted over 5 Mailbox Databases

The first steps went fine, up to migration of most of the data (94%) in al little over 2 weeks.

Some key entries of the logging are:

22-12-2014 13:22:29 [mail02] Copy progress: 2791025/2791842 messages, 1.038 TB (1,141,256,941,697 bytes)/1.038 TB (1,141,805,091,498 bytes), 174/21895 folders completed.
22-12-2014 13:27:35 [mail02] Stage: CopyingMessages. Percent complete: 94.
22-12-2014 13:27:35 [mail02] Copy progress: 2791831/2791842 messages, 1.038 TB (1,141,804,826,907 bytes)/1.038 TB (1,141,805,091,498 bytes), 174/21895 folders completed.
22-12-2014 13:27:39 [mail02] Copying messages is complete. Copying rules and security descriptors.
22-12-2014 20:03:56 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (1/60).
23-12-2014 04:52:55 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (2/60).
23-12-2014 08:37:19 [mail02] Transient error MapiExceptionMdbOffline has occurred. The system will retry (3/60).

---

23-12-2014 19:33:08 [mail02] Request processing continued, stage LoadingMessages.
23-12-2014 19:34:53 [mail02] Copying messages is complete. Copying rules and security descriptors.
23-12-2014 19:55:31 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (1/60).

23-12-2014 21:59:48 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (2/60).
23-12-2014 22:58:28 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (3/60).
23-12-2014 23:36:09 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (4/60).
24-12-2014 00:01:56 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (5/60).
24-12-2014 00:13:59 [mail02] Fatal error TargetMailboxConnectionStalePermanentException has occurred.
25-12-2014 22:40:28 [mail02] 'DOMAIN/Administrators/Admin' resumed request.
25-12-2014 22:40:38 [mail02] Job resumed with status 'Queued'.
25-12-2014 22:40:38 [mail02] Relinquishing job.

Now the status of the request is:

RunspaceId                       : 1d6f68ea-cca5-4646-ae36-eb13cafd93c1
Name                             : PublicFolderMigration
Status                           : Queued
StatusDetail                     : Relinquished
SyncStage                        : None
Flags                            : IntraOrg, Pull, SuspendWhenReadyToComplete
RequestStyle                     : IntraOrg
Direction                        : Pull
Protect                          : False
Priority                         : Normal
Suspend                          : False
SourceVersion                    : Version 14.3 (Build 210.0)
SourceDatabase                   : Public Folder Database EML
SourceServer                     : EML.DOMAIN.nl
BatchName                        :
OutlookAnywhereHostName          :
RemoteCredentialUsername         :
AuthenticationMethod             : Basic
RemoteMailboxLegacyDN            :
RemoteMailboxServerLegacyDN      :
BadItemLimit                     : 20
BadItemsEncountered              : 3
LargeItemLimit                   : 0
LargeItemsEncountered            : 27
FolderToMailboxMap               : {\, \IPM_SUBTREE\Werken\W0500, \IPM_SUBTREE\Werken\W1000, \IPM_SUBTREE\Werken\W2000,
                                    \IPM_SUBTREE\Werken\W3000, \IPM_SUBTREE\Werken\W3100, \IPM_SUBTREE\Werken\W3200, \I
                                   PM_SUBTREE\Werken\W3300, \IPM_SUBTREE\Werken\W3400, \IPM_SUBTREE\Werken\W3500, \IPM_
                                   SUBTREE\Werken\W3600, \IPM_SUBTREE\Werken\W3700, \IPM_SUBTREE\Werken\W3800, \IPM_SUB
                                   TREE\Werken\W3900, \IPM_SUBTREE\Werken\W4000, \IPM_SUBTREE\Werken\W4100...}
QueuedTimestamp                  : 8-12-2014 15:19:48
StartTimestamp                   : 8-12-2014 15:32:00
LastUpdateTimestamp              : 28-12-2014 15:40:58
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp               :
CompletionTimestamp              :
SuspendedTimestamp               :
OverallDuration                  : 20.00:31:19
TotalFinalizationDuration        :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration           : 2.04:18:22
TotalFailedDuration              : 4.11:29:57
TotalQueuedDuration              : 00:11:44
TotalInProgressDuration          : 10.14:39:13
TotalStalledDueToCIDuration      : 00:28:26
TotalStalledDueToHADuration      : 01:22:51
TotalStalledDueToReadThrottle    :
TotalStalledDueToWriteThrottle   :
TotalStalledDueToReadCpu         :
TotalStalledDueToWriteCpu        : 00:56:11
TotalStalledDueToReadUnknown     : 22:57:32
TotalStalledDueToWriteUnknown    :
TotalTransientFailureDuration    : 00:40:50
TotalIdleDuration                : 08:32:59
MRSServerName                    :
EstimatedTransferSize            : 0 B (0 bytes)
EstimatedTransferItemCount       : 0
BytesTransferred                 : 1.11 TB (1,220,750,777,478 bytes)
BytesTransferredPerMinute        :
ItemsTransferred                 : 2888617
PercentComplete                  : 20
PositionInQueue                  : 1/1 (Position/Queue Length)
PreventCompletion                : True
FailureCode                      :
FailureType                      :
FailureSide                      :
Message                          : Job pickup failure: Resource reservation failed for 'Mailbox Database MAIL01/Mdb
                                   Write' (CiAgeOfLastNotification(Mailbox Database MAIL01)): load ratio 1,79769313
                                   486232E+308, load state 'Critical', metric 2147483647. This resource is currently un
                                   healthy.
FailureTimestamp                 :
IsValid                          : True
ValidationMessage                :
OrganizationId                   :
RequestGuid                      : 4830a2f8-bb0b-4f5e-95f5-510471b6ace2
RequestQueue                     : Mailbox Database MAIL01
ExchangeGuid                     : 84ed665e-e8de-4d22-85d6-dbfeefbb572d
Identity                         : f2320bf6-061b-444d-a9e5-2dc50ccec4a3\4830a2f8-bb0b-4f5e-95f5-510471b6ace2
DiagnosticInfo                   :
Report                           :
ObjectState                      : New

My question is: is there a way to override this error and continue the migration?

Thanks,

Leon

Microsoft Certified IT Professional Server Administrator

Microsoft Certified IT Professional Server Administrator