I have started in installing Exchange 2013. I ran schema update using the Exchange 2013 RTM. Should I go ahead and install Exch2013 RTm and just run the updates afterwards or should I run schema update again using the Exch2013 SP1 setup.exe?
↧
Can I run Exchange 2013 Schema more than once
↧
Can't send mail from exchange 2013 to exchange 2010 and vice versa
Afternoon all.
So our company is going through a change of name, which means new tree domain and new exchange server infrastructure. We started installing exchange 2013 in the root domain but decided to hold off as the company was set to change name anyway. So..... Now have built the new domain and it works perfectly, ensured all the necessary preps have been done at the root domain. Installed exchange, no problems, exchange 2013 can see the other 2010 exchanges but cannot send or receive mail from them. I have created custom smtp connecters with the following settings:
http://2share.co.za/Files/ex1.PNG
http://2share.co.za/Files/ex2.PNG
http://2share.co.za/Files/ex3.PNG
And have created a front end transport connector on the EX2013 box with the same settings. The emails just sit in the drafts folder if you login to the user mailbox via OWA. It's highly frustrating.
Any idea how to resolve this, would be nice if MS could make their products a little more compatible with one another. Just saying MS.
Shaun Crosby Senior Network Admin L@W Active
↧
↧
Microsoft Exchange Server Auth Certificate
Hi,
This is my third installation of Exchange 2013 server in the same forest but different Active Directory site /domain.
2 Exchange 2013 server are in one active directory site /domain i.e abc.xyz.com and this third server is in different AD site /domain i.e def.xyz.com.
To my surprise i am missing Microsoft Exchange Server Auth Certificate on this server.It is there on rest two exchange 2013 servers.
I am getting below warning message in event log due to this:
I am also getting one more error event which seems to be related to this:
Any idea what went wrong here and how to resolve it now...?
Regards,
Vishal Malhan
↧
Exchange Installation Error on Mailbox role: Transport Service Step
The error I receive occurs at 47% of the Mailbox Role: Transport Service installation. The details of the error are as follows:
Mailbox role: Transport service
FAILED
The following error was generated when "$error.Clear();
if ($server -eq $null)
{
set-ExchangeServerRole -Identity $RoleNetBIOSName -IsProvisionedServer:$true -DomainController $RoleDomainController
}
" was run: "Active Directory operation failed on DC1.xxxxxx.xxxxxx.com. This error is not retriable. Additional information: The object cannot be added because the parent is not on the list of possible superiors.
Active directory response: 00002099: NameErr: DSID-0305109C, problem 2005 (NAMING_VIOLATION), data 0, best match of:
'CN=EXCH-MBOX1,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=AZGT,CN=
Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxxx,DC=xxxxxx,DC=com'
".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
Also, when opening the setup log I have this:
[12/26/2012 17:51:25.0809] [1] [ERROR] A naming violation occurred.
[12/26/2012 17:51:25.0809] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___a16cb82f909348d3a32b9046f3bfb9ba Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[12/26/2012 17:51:25.0809] [1] Setup is stopping now because of one or more critical errors.
[12/26/2012 17:51:25.0809] [1] Finished executing component tasks.
[12/26/2012 17:51:25.0809] [1] Ending processing Install-BridgeheadRole
[12/26/2012 17:51:25.0825] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/26/2012 17:51:25.0825] [0] End of Setup
[12/26/2012 17:51:25.0825] [0] **********************************************
I have done a ton of searches trying to find a resolution to this error and there are two pages with a similar issue for Exchange 2007 but after trying the solutions suggested, the installation still fails with the same error.
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploylegacy/thread/dfa9961a-9b20-4c17-ae4d-ebf44c66c18f/
http://exchangetroubleshooting.blogspot.com/2011/05/unable-to-run-preparead-command.html/
Some additional information:
This is a clean installation of Exchange 2013 in a forest that has never had exchange.
The domain and forest preparations run without errors and are at functional level of 2003.
The Exchange server has all prerequisites installed for a Mailbox server role and is running on a VM with Server 2012 as the OS.
This error occurs on other VMs as well that we are trying to implement as mailbox servers in the same forest.
I am running the installation as an enterprise, schema, domain admin.
Thanks for your help in advance.
↧
NSF to PST! Require Information
Upgraded Lotus Notes version into newer 8.5 it has complex functionalities. These functions are not easily graspable and it takes long time to understand, I decide to export my data into another (MS Outlook) platform, is it possible, I want new updates about conversion in cost-effective manner. And if yes then suggests me the way?
↧
↧
Is it possible to migrate Small Business Server 2008 to Exchange 2013 install on it's own member server?
Trying to figure out of migration to Exchange 2013 is possible on a existing SBS 2008 with Exchange 2007. If it's possible, is it support by Microsoft as well?
Thank you!
↧
Local mailbox migration fails without warning or error
Hi all, and thinks in advance of any support.
We are running Exchange 2013 Standard Version 15.0 (Build 712.24)on Server 2008 R2 Standard
This is an upgrade from a migrated Exchange 2007
I am attempting to migrate mailboxes from the original database to a new local database on a slower storage tier.
The problem is that the mailbox (es) do not move. I am using the EMC migration GUI and setup the batch as per usual, selecting to move primary mailbox only (and not archive). The batch begins but results with 0 of 0 complete. There are also no Events logged.
I can create a new account, include it in the new DB and migrate that mailbox into whatever DB I like but a mailbox in the current DB will not move!
I’ve have checked permissions on mailboxes.
I’ve checked for move requests and cleared any that might exist. I double checked that no type of Moverequests exist i.e. CompletedWithWarning, CompletionInProgress, Failed
I’ve tried EMC and cmdlets.
I’ve tried archive and none archive assigned mailboxes…
Increased Bad Items limit on move
I tried new databases on different partitions.
And still no Errors or Warnings.
I hope you can provide some guidance.
We are running Exchange 2013 Standard Version 15.0 (Build 712.24)on Server 2008 R2 Standard
This is an upgrade from a migrated Exchange 2007
I am attempting to migrate mailboxes from the original database to a new local database on a slower storage tier.
The problem is that the mailbox (es) do not move. I am using the EMC migration GUI and setup the batch as per usual, selecting to move primary mailbox only (and not archive). The batch begins but results with 0 of 0 complete. There are also no Events logged.
I can create a new account, include it in the new DB and migrate that mailbox into whatever DB I like but a mailbox in the current DB will not move!
I’ve have checked permissions on mailboxes.
I’ve checked for move requests and cleared any that might exist. I double checked that no type of Moverequests exist i.e. CompletedWithWarning, CompletionInProgress, Failed
I’ve tried EMC and cmdlets.
I’ve tried archive and none archive assigned mailboxes…
Increased Bad Items limit on move
I tried new databases on different partitions.
And still no Errors or Warnings.
I hope you can provide some guidance.
↧
Get-ServerHealth DatabaseHealthLogGenerationRateMonitor
I've installed Exchange 2013 in a coexistence scenario with Exchange 2010. Both are single servers with all roles installed, all works well. However on the Exchange 2013 I when running get-serverhealth or get-healthreport I keep getting the messages that DatabaseHealthLogGenerationRateMonitor with HealthSetName DataProtection is unhealthy for all Exchange 2013 databases. What I can find so far is that it has to do something with DAG, which we have not implemented. How to handle this, can I disable it somehow?
Thnx Remco
↧
Delete time range email fron Database
Hi,
Anyone can help me with this:
1. Show oldest email in Exchange 2013 organization
2. Delete time range email from entire 2013 organization (EJ: from 01/01/2000 to 01/01/2013)
Thanks in advance
↧
↧
Exchange setup issues
Hi
Am trying to setup email (outlook for mac 2011)
Have purchased exchange account and commenced setup.
Followed instructions precisely and instructed domain host to make DNS changes as precisely listed in setup instructions.
However, I still get the following:
DNS records not found - msoid.treoenvironment.com
The domain host swears blind they have completed the instructions and tell me that propagation is complete - they forwarded me a DNS propagation check sheet.
Any ideas at all what is going on!!
↧
Exchange 2013 CU5 will not install, please help
Hi everyone
Please help, I am trying to upgrade Exchange 2013 SP1 to CU5 but it just stops at the following point, please help:
↧
Trouble Migrating
Hello,
I have recently tried to migrate a user to another database and I am having some issues. I originally was trying to migrate the user to another database but I stopped it midway and tried to create another migration batch to move the users mailbox. Now I am getting an error saying that MigrationPermanentException: Mailbox 'X' is already being moved to "Y"
Mailbox"X" is already being moved to "Y"
I have since deleted the old Migration Batch and have not been able to figure out how to fix this problem. Any help would be appreciated I am running a VM with Server 2012 and Exchange 2013
thanks in advance
↧
Office 365 migation from on-premise Exchange 2010 failed due to new mailbox created
Hello There,
We attempted to stage users to Office 365 from Exchange 2010 but the process failed due to Office 365 creating new mailbox after we initiate the license. It turned out that Office 365 will create a new mailbox if nothing in the object attribute indicates that there is already a mail-enabled object in the cloud during the licensing process. My question is what are these attributes to prevent Office 365 from creating new mailbox and recognize the mail-enabled object already exists??
Any reply is greatly appreciated.
Regards,
Lotusmail1
Franz Garcia
↧
↧
Unable to access Exchange 2013 EAC/ECP webpage
Hi All,
Getting extremely frustrated now with a new Exchange 2013 installation on a Windows Server 2012 VM...
After having a lot of problems with the installation (didn't uninstall visual c++ which caused failure, then needed to delete the AD Microsoft Exchange System Objects group due to permission failures, etc) I've now got a fully installed Exchange server. Still, now I cannot figure out how to fix my next problem - Accessing the EAC/ECP.
I've searched every possible web guide/forum thread and the only one which is the same issue I'm having is this one: http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/89c42771-78c9-4d94-88e5-557320eccc71
Unfortunately, as you can see in that thread, it is still unresolved.
Current Issue: trying to access https://localhost/ecp (or any other variation) returns a 404 Not Found.
The error page points the physical path to c:\inetpub\wwwroot\ecp however that folder does not exist. I have tried manually changing the IIS site (Exchange Back End) to point its physical path to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp which seems to be valid, however it doesn't work...
Not sure what else to do... HELP!
Oli
↧
Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
having problems on new server so I followed instructions to remove Exchange Server 2013 Sp1 using ADSI edit p;er these instructions:
http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
now when I re-run setup for exchange 2013 SP1 I get the error :
"Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."
David Sheetz MCP
↧
can not create autodiscover directory
Hello
we had some issues with autodiscover conguration client are not able to auto setup thier outlook profile so i remove the virtual directory by using the below command
Remove-AutodiscoverVirtualDirectory -Identity "cas1\Autodiscover (Default Web Site)"
and it was removed fine now im trying to create the directory again but i got this error
[PS] C:\Windows\system32>New-AutodiscoverVirtualDirectory -WebSiteName "Default Web Site" -BasicAuthentication $true -WindowsAuthentication $true
Argument: -Role ClientAccess
+ CategoryInfo : InvalidArgument: (:) [New-AutodiscoverVirtualDirectory], ArgumentException
+ FullyQualifiedErrorId : DD125126,Microsoft.Exchange.Management.SystemConfigurationTasks.NewAutodiscoverVirtualDirectory
+ PSComputerName : cas1.domain.com
thank you.
↧
Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1
This is still a problem with installing CU5.
Do you have just a few less than an infinite number of monkeys writing your code these days?
-=Chris
↧
↧
After Public Folder Migration 2010 to 2013
Last week I used technet page to migrate our exchange 2010 public folders over to exchange 2013. I'm still new to exchange management so I'm trying to understand what to do next.
The migration move showed 100% complete and successful and now show up as a mailbox in the 2013 admin center. I thought to myself Great! I did it. So I attempted to decommission my 2010 exchange server.
I attempted to remove my public folder database in the 2010 EMC and it tells me the database still contains folder replicas.
I found a couple options as possible fixes, either to remove it in ADSI edit or delete the files in the folder. I just want to make sure doing so won't effect the 2013 public folders.
Or should I do this a different way? Thanks in advance.
↧
User mailbox migration
I plan to migrate user mailbox from Exchange 2007 to Exchange 2013. However, I got one problem. One user can not be migrated successfully. Whenever, I tried it. The system shows that it is successful in the report. However, it is still in the old database.
Does someone meet with such problem before.
↧
Update Exch '13 from CU3 to SP1 taking many hours - Set-LocalPermission cmdlet at fault
I started an the upgrade on our Exchange 2013 Standard server last night. It was previously on CU3 and I'm updating it to SP1.
It's been 13 hours and it's still only on step 14 of 18.
Our server meets the minimum hardware requirements for Exchange 2013, although we are on the very low end for RAM (8 GB).
Do others have similar experiences? How long did it take you to install SP1?
Besides having a test environment or running high availability does anybody have tips for how to speed up this process?
EDIT: After reviewing the logs (see my first response below) I see that the Set-LocalPermissions cmdlet is taking over an hour to run each time it's called. Any idea why that would be?
↧