Shyam
I have a SBS2011 server running as a VM and its currently got exchange running with SP1 rollup 8
I would like to upgrade exchange to service pack 3 and then update to its latest rollup
what are the steps I need to take to get from sp1 to the latest patch level.
do I need to install SP2 first?
do I need to run any schema or ad preps before updating if so what is the syntax for this
thanks
simon
Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet
Hello:
I'm working with exchange 2003 enterprise and my question is:
do you need to run domainprep on a child domain or just the top level domain? Example:
run doaminprep on only WINX-CESD-US.LOCAL, or on WINX-CESD-US.LOCAL and all of its child domains like the following:
WINX-CESD-CA.WINX-CESD-US.LOCAL
WINX-CESD-EU.WINX-CESD-US.LOCAL
WINX-CESD-AU.WINX-CESD-US.LOCAL
any assistance given would be greatly appreciated
Dear All,
I've Exchange 2013 on Windows 2012 server and external internet users have been reporting that attachments they receive from internal users are showing only as winmail.dat .
When I use this command "Set-RemoteDomain -Identity * -TNEFEnabled $false" , it solved my issue with the winmail.dat sending with attachments and PDF files etc delivered.
However, once this was enabled we were having delivery failure notifications and having large number of emails (going to external users) that would get stuck in the submission queue. I had to enter following command "Set-RemoteDomain -Identity * -TNEFEnabled $true" to solve the problem and winmail.dat issue came back and attachments were not delivered.
When users report attachment winmail.dat issue, I have to create new remote domain and specify -TNEFEnabled $false everytime like below for the failed domains (They are usually non Microsoft clients, I think).
New-RemoteDomain -Name xxxx -DomainName xxxx.com
Set-RemoteDomain -Identity xxxx -TNEFEnabled $False
Setting client`s Outlook mail format to Plain Text or HTML doesn`t help.
I don`t mind create every time but users have to experience this issue and then I can add remote domain and solve the issue but it is creating inconvenience. Do you have any permanent solution for this problem?
Kind regards,
Itech
Hi,
I attempted to update but I have received this error in step 10 of 18: Mailbox role: Transport service
Error:
The following error was generated when "$error.Clear();
Uninstall-CrimsonManifest -DefinitionXml "bin\PushNotificationEvents.man";
Install-CrimsonManifest `
-DefinitionXml "bin\PushNotificationEvents.man" `
-MessageDll "bin\Microsoft.Exchange.PushNotifications.CrimsonEvents.dll" `
-ProviderName "Microsoft-Exchange-PushNotifications";
if (!$RoleIsDatacenter -and !$RoleIsDatacenterDedicated)
{
$pathForwevutilcmd = join-path $env:SystemRoot System32\wevtutil.exe;
if (Test-Path $pathForwevutilcmd)
{
invoke-expression ($pathForwevutilcmd + " sl 'Microsoft-Exchange-PushNotifications/Analytics' /e:false");
}
}
" was run: "System.InvalidOperationException: Failed to perform event manifest action (manifest = C:\Program Files\Microsoft\Exchange Server\V15\bin\PushNotificationEvents.man, action = install-manifest,
exitcode = 15010, errors = Configuration error.
)
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallCrimsonManifest.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Error:
The following error was generated when "$error.Clear();
Uninstall-CrimsonManifest -DefinitionXml "bin\PushNotificationEvents.man";
Install-CrimsonManifest `
-DefinitionXml "bin\PushNotificationEvents.man" `
-MessageDll "bin\Microsoft.Exchange.PushNotifications.CrimsonEvents.dll" `
-ProviderName "Microsoft-Exchange-PushNotifications";
if (!$RoleIsDatacenter -and !$RoleIsDatacenterDedicated)
{
$pathForwevutilcmd = join-path $env:SystemRoot System32\wevtutil.exe;
if (Test-Path $pathForwevutilcmd)
{
invoke-expression ($pathForwevutilcmd + " sl 'Microsoft-Exchange-PushNotifications/Analytics' /e:false");
}
}
" was run: "System.Management.Automation.RemoteException: Failed to read configuration for log Microsoft-Exchange-PushNotifications/Analytics. The specified channel could not be found. Check channel configuration.".
Now Exchange services don't start anymore.
What problem can be?
Thanks.
Hi,
I'm migrating a single server Exchange 2010 SP3 ur12 setup to 2013 cu12. Mail flow, OWA and ActiveSync all function, and I've migrated all the user mailboxes. Now I'm trying to migrate the Public Folders using batch migration following this TechNet article:
TechNet.microsoft.com/en-us/library/dn912663(v=exchg.150).aspx
I've made it to step 5, but when I run the migration batch it does nothing for five hours then gives me "synced with errors. The error is synctimeoutexception, status is Failed, and zero bytes are transferred. Haven't been able to find much on this, but my account permissions seem good (domain admin with Org and Server Management membership. The public folders contain three mail enabled calendars with no blanks in the aliases and less than 200 MB of data. Removing the batch and running it a second time gave the same result.
Been banging my head against this since yesterday and I'm stumped. I would greatly appreciate any ideas! Thank you.
Hi,
when I send email from exchange 2013 to exchange 2007 but exchange 2007 to exchange 2013 yes..
returned '451 4.4.0 Primary target IP address responded with: "451 5.7.3 Cannot achieve Exchange Server authentication." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts
Alejandro | Especialista en Infraestructura Microsoft y Fortinet|
I am preparing to migrate an Exchange 2010 infrastructure to 2013. My test setup is a small-scale setup of our production environment consisting of two Exchange 2010 servers and two Exchange 2013 servers, both instances are multi-role.
I have now pointed all client connections to pass through the Exchange 2013 server. My outlook 2013 client connects fine to an Exchange 2010 mailbox but when I try to access a 2013 mailbox uisng Outlook 2013 I get the following error “The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action". A further pop box appears with below error.
I can connect to both Exchange 2010 & 2013 mailboxes via Outlook Web App with no issue. On my Windows 7 pc I can browser to https://autodiscover.domain.com/autodiscover/autodiscover.xml which indicates that autodiscover is working as it should.
Any suggestions on how to proceed. Thanks in advance
Hi folks,
We are in migrating project from Exch-2010 to Exch-2013. While doing migration we used to check the service health of 2013 servers.
CAS - 2 nos, 1 - DR
MBX - 2 Nos, 1 - DR
Earlier, from both CAS servers, i run a command in powershell Test-ServiceHealth, it will show the results( I understood that it get the results from mailbox servers only from the thread:
https://social.technet.microsoft.com/Forums/office/en-US/56d4f05c-48c8-4413-8856-d86448d0c424/testservicehealth-issue?forum=exchangesvradmin)
Now, One of the CAS server showing that :
[PS] C:\Windows\system32>Test-ServiceHealth
There are no Microsoft Exchange 2007 server roles installed on exchcas01.abc.LOCAL.
+ CategoryInfo : InvalidArgument: (:) [Test-ServiceHealth], NoExchangeRoleInstalledException
+ FullyQualifiedErrorId : [Server=EXCHCAS01,RequestId=7c0be523-b889-4328-a734-1ac164af9f71,TimeStamp=6/6/2016 1
:04:48 PM] [FailureCategory=Cmdlet-NoExchangeRoleInstalledException] 403CA597,Microsoft.Exchange.Monitoring.TestSe
rviceHealth
+ PSComputerName : exchcas01.abc.local
But CAS server 02 is working fine to proxing to mailbox server and showing the results.
Please guide me to resolve this, whether is it reflects any problems?
Created a Migration Batch I have not started it just Created it and it seems like there is no way to pull the email addresses in the batch. Without starting the batch? I was able to use the Get-MigrationBatch and pull the information on how many mailboxes are in the Batch but not the email addresses. I tried Get-MigrationUser and nothing pulled.
Has anyone else seen it.
Hi,
We are planning for Lotus Domino to office 365 migration with Hybrid setup of on prem exchange and Office 365.
Since there are lot of dependency in Lotus Domino, coexistence might run for long term. During the transition we are planning for Domino to On Prem Exchange migration and slowly moving to Office 365.
There will be some time during which all three - Lotus Domino, Exchange 2013 On prem and Office 365 need to coexist. I am not able to draw the mail flow structure from Lotus Domino to Office 365 and visa versa.
It will be great if any one can suggest or guide how we can achieve working environment for all 3 messaging system as coexistence.
Regards:Mahesh
Hi,
I'm receiving the following error and I am trying to find information on how I might resolve it:
Error:
The subscription for the migration user firstname.lastname@test.com couldn't be loaded. The following error was encountered: Couldn't find a move request that corresponds to the specified identity '4dba9db8-2ad7-485d-8e62-1392f154d291'..
We have two exchange server as coexist server(exchange 2007 & 2013) until exchange server migration get complete.
The error message is generated by a successfully synced mailboxes move migration from an on premises Exchange 2007 server to an on premises Exchange 2013 server.
Got this error message on each mailbox of an migration batch that is working and seemingly has migrated to Exchanged 2013 successfully. I am getting ready to take down my old 2007 Exchange server but I am concerned seeing this Error.
Certain days of migration batch(latest batches) for moving mailboxes don't have this error message. Like the same wise, certain date of migration batch(old batches) has this error message when I click to view details.
When I click on the error message, it will go off.
MY Exchange server OS : Windows 2012 R2 Standard 64bit
Exchange : Exchange 2012 CU10 Enterprise
Thanks
Hi,
As we are in progress of Migrating of our existing Exchange server from 2007 to 2013. First stage of configuration change in CAS server is completed. Now we are in progress of migrating the users mailboxes from 2007 to 2013 server, hence we do have both
servers on production as coexist (exchange 2007 & exchange 2013). Almost 99% of mailbox migration is completed, next we have to migrate the "Mail Contact"
In my exchange 2007 server we have many Mail Contact which was created already. I do want to know, whether I have to migrated theMail Contact manually to my new exchange 2013 or will it automatically get migrate to the new server or any upgrade is required ?
If I need to migrate all the Mail Contacts manually to my new exchange 2013, please let me know, best and easy practice to do this process.
Thanks
Trying to install CU12 fails with the error below. I tried restarting the server and re-running the install but it just happens again. Anyone have any ideas what is causing this?
Best Regards, Morris Fury AFRIDATA.net
In my previous question, I asked for insights to clean up my DNS and trusted certificates so I can get to my Exchange 2013 Server on Server 2012 R2 Essentials, which is in my domain on Server 2012 R2 Essentials.
https://social.technet.microsoft.com/Forums/en-US/winservergen/thread/da680a54-2588-427e-abcd-fedd0c7c5a7b/
That issue is resolved, but I am still unable to get Outlook 2013 (on Windows Pro 8.1 Pro) connected to my Exchange 2013 server.
I believe the problem is that Exchange/Outlook need to use ports 80 and 443, but so does the domain server. My router sends port 80 and 443 to the domain server (no problem there) but those ports are also needed for Exchange/Outlook. I suspect IIS on the domain server must filter Exchange/Outlook use of ports 80 and 443 and redirect them to the exchange server, leaving all non-mail uses of ports 80 and 443 to remain being routed to the domain controller.
I may have miss-diagnosed why I cannot get Outlook 2013 connected to Exchange 2013. After all, I'm on over 40 prescription medications, so my mind is a bit clouded. I can use some direction and references to solve this issue. I'm already seeing something for my mind flossing.
I have no problems using Outlook Web Access (owa).
Please
- Michael Faklis
We have completed our migration of all mailboxes and public folders from 2007 to 2013 and are now ready to start decommisioning the 2007 servers. We are still using Exchange 2007 Edge Transport servers for the time being.
My question is this..
Since installing 2013 I have not yet re-done the Edge subscriptions. So the Edge Transports are handing off to the 2007 hubs still and from there email is getting routed to the 2013 servers.
To remove the 2007 hubs from the mix I would assume I need to re-do the Edge subscription from one of the 2013 servers. Is that correct?
If so, can I then shutdown the 2007 hubs or are there additional steps I need to take?
If anyone can provide me the steps to make this transition without disrupting mail flow that would be greatly appreciated.
Thank you.
Kenny
Hi again:
First at all, thanks to all technicians, architects, etc, all staff around here, your help is so helpful where we can´t found anything on Microsoft webs and specialists websites.
The issue:
I´ve a rule in my mailbox that is disable, I´ve disabled it by Outlook as a normal user will do:
If I want to check by powershell my rules, it doesn´t list this rule:
even with the | fl
Here I´ve activated it, and of course now I can see it:
it´s the second one, with name trank@hotmail.com
But I need to be able to check disabled rules as this.
How can I see on powershell those disable rules¿¿??
thanks a lot guys.
Hi,
We are in progress of Migrating of our existing Exchange server from 2007 to 2013. Right now first part of migration is completed. Now we are in progress of migrating the users mailboxes from 2007 to 2013 server, hence we do have both servers on production as coexist (exchange 2007 & exchange 2013).
In my exchange 2007 server we have many DL's and Mail Contact which was created already. I do want to know, Whether I have to migrated theDistribution List (DL) & Mail Contactmanually to my new exchange 2013 or will it automatically get migrated to new one from old exchange 2007 ?
If I need to migrate all the DL's and Mail Contacts manually to my new exchange 2013, please let me know, best and easy practice to do this process.
Thanks
Thanks