Quantcast
Channel: Exchange Server 2013 - Setup, Deployment, Updates, and Migration forum
Viewing all 7129 articles
Browse latest View live

Exchange 2013 Setup failed then sits at zero percent when rerunning it

$
0
0

I'm do an install of Exchange 2013 into a forest with an existing Exchange 2010. I plan on migrating my users from Exchange 2010 to Exchange 2013. 

During the original setup of Exchange 2013 I got to step 10 of 14 and Exchange 2013 setup failed because of the Default Search Mailbox. Reading a few articles on the web said to disable the mailbox and then re-run setup. I disabled the mailbox and then restarted Exchange 2013 setup. Setup starts and says:

Incomplete Installation Detected

When I click "next" I get another screen that says "Setup Progress" but it never moves past zero percent. 


Thanks... Frank


Add new domain in Exchange 2007 and forward old domain emails to new domain

$
0
0

Dear All,

we have Exchange 2007 running with abc.com domain and my organization has purchased new company xyz.com. The officials decided to move our all email communication with new company xyz.com and will also keep our old domain abc.com for some time.

The plan is after moving new domain xyz.com all email that will be received on old domain abc.com will be forwarded to new domain xyz.com.

Kindly suggest what will be the best practice to accomplish this task as I have read that add new domain in accepted domain and set email address policy, but how the email will be forwarded after changing in MX and DNS record on new domain.

Please suggest best solution.

Does CU's for 2013 affect Exchange 2010 during coexistance?

$
0
0

Hello!

Just to be sure... when upgrading Exchange 2013 to latest CU during coexistance with Exchange 2010... does the 2013 upgrade affect 2010 somehow?

Thanks!

Exchange 2013 Can't Log in to ECP anymore (Virtual Directories) Help

$
0
0

Hello

This is my setup

Server01: Server 2012 Standard + Exchange 2013

Server02: Server 2012 Standard + Exchange 2013

Server01: MBX+CAS

Server02:MBX+CAS

after I installed these servers and rebooted them I loged into the ECP of Server01, when I tried the same with Server02 I got Internal Error 500.

I don't know what it can be, But maybe a corrupted Virtual Directory, because when I log into Server01 and try to go to Proporties on Server02 ECP in the "Virtual Directories" or something with the IIS, something with the the certificate maybe? I get this error bellow:

The Task wasn't able to connect to IIS on the server "test.local" Make sure that the server exists and can be reached from this computer: The RPC Server is unavaiable.

well RPC, there isen't teally any real RPC in Exchange 2013 If I'm not wrong over here? or they use it in another way.

Thank You For your help!

New domain, new Exchange 2013 deployment within same Exchange Org?

$
0
0

We currently have following structure:

Empty Root - OURCORP.LOCAL

Child domain - XYZCORP.COM  (both, internal/external dns names)

Exchange Org/2010 DAG currently exists in XYZCORP.COM. The company is planning to add new child domain - NEWCORP.COM and also introduce Exchange 2013 into an existing Org. The company wishes to create new Exchange infrastructure in NEWCORP.COM child domain and then get all the mailboxes out of XYZCORP.COM to NEWCORP.COM Exchange infra.

1. Is it possible to introduce an entirely new set of exchange servers within same Exchange Organization but in a different domain? 

2. What are the caveats/constraints we need to be aware of in general? What about for co-existence / migration scenarios, considering it's in the same forest? 

3. Any links specifically dealing with the Active Directory design and planning for Exchange in multiple child domains would be most appreciated.

Thanks in advance!

Unable to access ECP/OWA

$
0
0

I installed Exchange 2013 on 2 brand new Server 2012 virtual machines, one with the mailbox role and another with the CAS roles. The installation completed without errors but I cannot log on to the ECP (or OWA for that matter). As I enter my user/pass, the password field goes blank and a number of event log entries are added (see below).

I'm using the default administrator account (also Enterprise Admin, Domain Admin and member of the Organization Management security groups). I mail-enabled the account with enable-mailuser + enable-mailbox. I can execute Exchange Powershell cmdlets when logged on with this account, so security looks good.

The problem is OWA/ECP which consistenly logs the following errors when I attempt to access the OWA:

[Ecp] An internal server error occurred. The unhandled exception was: System.Security.Cryptography.CryptographicException: Invalid provider type specified.

   at System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer)

   at System.Security.Cryptography.Utils.GetKeyPairHelper(CspAlgorithmType keyType, CspParameters parameters, Boolean randomKeyContainer, Int32 dwKeySize, SafeProvHandle& safeProvHandle, SafeKeyHandle& safeKeyHandle)

   at System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair()

   at System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey()

   at Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication)

   at Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication)

   at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClassa.<OnBeginRequest>b__9()

   at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)

---------------------------------------------------------------------

[Owa] An internal server error occurred. The unhandled exception was: System.Security.Cryptography.CryptographicException: Invalid provider type specified.

   at System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer)

   at System.Security.Cryptography.Utils.GetKeyPairHelper(CspAlgorithmType keyType, CspParameters parameters, Boolean randomKeyContainer, Int32 dwKeySize, SafeProvHandle& safeProvHandle, SafeKeyHandle& safeKeyHandle)

   at System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair()

   at System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey()

   at Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication)

   at Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication)

   at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClassa.<OnBeginRequest>b__9()

   at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)

---------------------------------------------------------------------------

Event code: 3005

Event message: An unhandled exception has occurred.

Event time: 28/11/2012 0:47:38

Event time (UTC): 27/11/2012 23:47:38

Event ID: 12c0aac14e0c45b093e860f6699b0d76

Event sequence: 4

Event occurrence: 3

Event detail code: 0

Application information:

    Application domain: /LM/W3SVC/1/ROOT/Rpc-2-129985330412727995

    Trust level: Full

    Application Virtual Path: /Rpc

    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc\

    Machine name: <cleaned up>

Process information:

    Process ID: 4848

    Process name: w3wp.exe

    Account name: NT AUTHORITY\SYSTEM

Exception information:

    Exception type: HttpException

    Exception message: The client disconnected.

   at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.EndProcessRequest(IAsyncResult result)

   at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)

Request information:

    Request URL: http://<cleaned up>/rpc/rpcproxy.dll?688b9c54-fc83-47a6-bf82-343799d288d5@falcora.net:6001

    Request path: /rpc/rpcproxy.dll

User host address: fe80::d58e:d780:34ed:af68C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc\

    User: FALCORA\SM_29bd07d0480e4b41a

    Is authenticated: True

    Authentication Type: NTLM

    Thread account name: NT AUTHORITY\SYSTEM

Thread information:

    Thread ID: 18

    Thread account name: NT AUTHORITY\SYSTEM

    Is impersonating: False

    Stack trace:    at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.EndProcessRequest(IAsyncResult result)

   at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)

 

I have spent hours wading through log files and posts, and cannot get my head around this one. 

Exchange 2010 SP1 EWS Virtual Directory - Autoreply-free/busy errors.

$
0
0

Basic info

Exchange 2010 SP1 on Server 2008 R2.  An Upgrade from Exchange 2007.  Auto Reply returns an error from Outlook "Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later."  When attempting to access auto reply from OWA, the user is brought back to an OWA login screen.  (which does not allow the user to log back in)  This is a different URL than the normal OWA log in URL.

I have attempted to remove and recreate the EWS directory without success. In current troubleshooting, if I attempt to remove the virtual directory, I receive an error it does not exist on the domain controller, if I try to recreate it, it tells me it already exists.  If I try to set it, it tells me it cannot be found.

PowerShell information included below...

I have tried many different methods to resolve this so far without success.  (hence posting here) I HAVE NOT yet attempted removing/reinstall the CAS role, or anything involving adsi edit.

[PS] C:\>Remove-WebServicesVirtualDirectory -Identity "EWS (Default Web Site)"
The operation couldn't be performed because object 'Server.Domain.net\EWS (Default Web Site)' couldn't be f
ound on 'DomainController.Domain.net'.
    + CategoryInfo          : NotSpecified: (0:Int32) [Remove-WebServicesVirtualDirectory], ManagementObjectNotFoundEx
   ception
    + FullyQualifiedErrorId : AE5EDDA2,Microsoft.Exchange.Management.SystemConfigurationTasks.RemoveWebServicesVirtual
   Directory

[PS] C:\>get-webservicesvirtualdirectory | fl identity,internalurl,externalurl
[PS] C:\>

[PS] C:\>New-WebServicesVirtualDirectory -Identity 'server\EWS (Default Web Sit
e)' -InternalUrl  https://webmail.domain.net/EWS/Exchange.asmx -basicauthentication 1 -windowsauthentication 1
The virtual directory 'EWS' already exists under 'server.domain.net/Default Web Site'.
Parameter name: VirtualDirectoryName
    + CategoryInfo          : InvalidArgument: (server\EWS (Default Web Site):ADObjectId) [New-WebServicesVirtual
   Directory], ArgumentException
    + FullyQualifiedErrorId : 775B2C6B,Microsoft.Exchange.Management.SystemConfigurationTasks.NewWebServicesVirtualDir
   ectory

[PS] C:\>Set-WebServicesVirtualDirectory -Identity "server\EWS (Default Web Site)" -InternalUrl  https://webmail.domain.net/EWS/Exchange.asmx
The operation couldn't be performed because object 'server\EWS (Default Web Site)' couldn't be found on 'DomainController.Domain.net'.
    + CategoryInfo          : NotSpecified: (0:Int32) [Set-WebServicesVirtualDirectory], ManagementObjectNotFoundExcep
   tion
    + FullyQualifiedErrorId : D6F18491,Microsoft.Exchange.Management.SystemConfigurationTasks.SetWebServicesVirtualDir
   ectory

[PS] C:\>get-webservicesvirtualdirectory | fl identity,internalurl,externalurl
[PS] C:\>

user Creation

$
0
0

What if your organization, have 4 or 5 user with the same name and same surname,

How could end user find in global address list , this is the right person , I have intended to send a mail .


Migration Issues 2007 to 2013

$
0
0

Good Afternoon,

I recently installed Exchange 2013 with the CU1 update and am trying to migrate mailboxes over to 2013.  Before I was even able to get into my EAC I had to manually had my SYSTEMS\Administrator login to the Exchange Organization Admins.  I found out this seems to happen when you do an /PrepareAD with a different login than you are using.

I am in a setup with three domains;  the exchange server is in a sub domain and only supplies mailboxes for the subdomain users.  The schema update and prepareAD was completed in the FOREST level domain.

When I migrate a mailbox it seems to migrate the entire mailbox but when it goes to perform clean up it fails, with the following error.

Failed to reset the target mailbox after the move. Attempt 27/481. Error: MapiExceptionADUnavailable.

Any help would be of great assistance.

Cheers,

Johnathan

Migrate exchange 2007 sp1 (installed on 2008R2) to exchange 2010 sp1 - plans and suggestions

$
0
0

Hi all

I have a strange enviroment here, and trying to figure out what's the best way to implement.

dc+exchange sp1 installed on server 2008 r2

The customer wants to migrate to exchange 2010.

I was suprised to see exchange sp1 installed on 2008r2, but what's done is done. I need to figure out the best way to migrate their mailbox.

This is what i am thinking:

1. setup another server 2008 r2 server, adprep, domain prep, then install exchange 2007 sp3.

2. Move mailboxes from exchange sp1 to exchange sp3

3. Once done, remove and uninstall exchange 2007 sp1 roles from the old DC.

4. Setup another server 2008r2 server, adprep, domain prep, then install exchange 2010 sp1.

5. Move mailboxes from exchange sp3 to exchange 2010 sp1.

Please let me know if this plan is applicable, as i am not sure if move mailboxes from 2k7sp1 to 2k7 sp3 would work nicely or not. If this thought is not going to work, is there anyways to make things work?

Thanks a lot!!!!!!

How to permanently delete Deleted Items from Recoverable Items

$
0
0

hello,

i am trying to figure out How to permanently delete, Deleted Items that end up in the Recoverable Items.  We have a storage issue and need to clean out as much old space as we can.  we would like to permanently delete mail that users delete from their deleted folder for mail older than 30 days.  Our backup storage is full.  we do full image backups so i can't just move this stuff i have to permatenly delete it.

This is for Exchange 2010 Version: 14.02.0328.009

server 2008 R2 standard SP1

please advise

thanks

Stephen

Recommended Hotfixes for Exchange Server 2013 DAGs on Windows Server 2012 ?

$
0
0

Hi

Im looking for a list of hotfixes for cluster rule that are needed for Exchange Server 2013 DAGs.

Thanks!


Wojciech Sciesinski

Migrate Exchange 2010 SP2/hosting to Exchange 2013CU1 Multi-Tenancy

$
0
0

We have an Exchange SP2/hosting setup running and want to upgrade to Exchange 2013CU1 

Is it possible to upgrade SP2hosting to sp3/hosting and install a new Exchange 2013cu1 setup and migrate the organizations and mailboxes without building a new forest ?

Or must i make a new forest with exchange 2013 and migrate then using the migration tools ?

Wouter


Problem Uninstalling Exchange 2013

$
0
0

Hi everyone,

Need some help here.  Been trying to install Exchange 2013 to coexist with our live Exchange 2010 environment and was having issues with the mailbox hub transport role.  Been trying to uninstall exchange to try again and come up with the following error.  Any help would be appreciated.  

Error:
The following error was generated when "$error.Clear(); 
                    $agentName = "Text Messaging Delivery Agent";
                    $agent = get-transportagent -Identity:$agentName;
                    if ($agent) {
                    uninstall-transportagent -Identity:$agentName;
                    };
                " was run: "No valid agents.config file was found in 'C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\Shared\agents.config'.  The default configuration for transport agents can be recovered by running 'scripts\ReinstallDefaultTransportAgents.ps1'.".

Error when selection Organizatonal Unit in ECP

$
0
0

Exchange 2013 CU1
Server 2012 member server
New install, nothing on this server previously.
All windows updates completed to 4/10/2013
Account used is full administrator and confirmed that this account has rights in Organizational Management and Server Management.
Co-existance with Exchange 2010, migration has been started

In ECP, in any function that has a picker for Organization Unit (example like rules in Dynamic Group), when the box opens you get the error "Exception has been thrown by the target of an invocation"

The error log displays:

https://xxx.xxxxx.com:444/ecp/DDI/DDIService.svc/GetList?schema=OrganizationalUnitPicker&msExchEcpCanary=WOPb_kFW1UaYtHsSmmFUtNJIbzJ0B9AI2n9s_4DiXWprkg3QFgDPXItPUSetvJNF_bnM8wV_zfY.(https://xxx.xxxxx.com/ecp/DDI/DDIService.svc/GetList?schema=OrganizationalUnitPicker&msExchEcpCanary=WOPb_kFW1UaYtHsSmmFUtNJIbzJ0B9AI2n9s_4DiXWprkg3QFgDPXItPUSetvJNF_bnM8wV_zfY.)
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Exchange.Management.DDIService.OrganizationalUnitPickerService.BuildOUTree(DataTable dataTable) at Microsoft.Exchange.Management.DDIService.OrganizationalUnitPickerService.GetListPostAction(DataRow inputRow, DataTable dataTable, DataObjectStore store)

Everything else works fine and I been migrating users from Exchange 2010 with no other problems.

Ideas?


Exchange 2013 P2V VMM 2012

$
0
0

Hello,

I have a single server Exchange 2013 installation on Windows Server 2012.  I need to virtualize this server onto new hardware using Hyper-V and VMM.  Could someone please give me guidance as too the best way to accomplish this.  Somewhere I am doing something wrong.  I tried Disk2VHD but when I created a new VM and added this vhd the virtual machine would not start.  When trying both online and offline P2V within VMM the process fails along the way.

Someone please point me in the right direction as I am under the gun to get this migration done.

Your help is greatly appreciated.

Thanks,

Kevin

Migration of Mailbox issue

$
0
0

We're running a 2007/2013 Hybrid and have successfully migrated several accounts to Exchange Online which are working without issue.

I do however have one account I just cant get migrated and it fails with the following report. I don't think either of the reasons listed are relevant. I am the only admin, the mailbox isn't locked, and lastly MRS must have the correct permissions as I've migrated mailboxes successfully before and after this one.

If I check the current status of the job while its migrating it only ever syncs 468kb of mailbox data and then gets stuck

I've managed to migrate the mailbox from its original DB to another DB on the 2007 server so there is nothing fundamentally wrong with the mailbox itself.

Has anyone else ever encountered this error ?

Thanks

"Error: Couldn't switch the mailbox into Sync Source mode.
This could be because of one of the following reasons:

Another administrator is currently moving the mailbox.

The mailbox is locked.

The Microsoft Exchange Mailbox Replication service (MRS) doesn't have the correct permissions.
  Network errors are preventing MRS from cleanly closing its session with the Mailbox server. If this is the case, MRS may continue to encounter this error for up to 2 hours - this duration is controlled by the TCP KeepAlive settings on the Mailbox server.
Wait for the mailbox to be released before attempting to move this mailbox again."

Building a Hosted Exchange Internally for FOPE

$
0
0

Can't seem to find the Exchange 2010 forums.

I'm looking to upgrade to Exchange 2010 from Exchange 2003 SP2. In this environment we have AD 2003 and Exchange 2003 SP2. To get started I'll be installing Exchange 2010 on W2K8 servers and adding Forefront in addition to using my existing Ironport devices. To this point I also have some dated encryption devices which need replacing. What I'm considering is building an INTERNAL environment similar to FOPE without having to subscribe to a cloud hosted service provider. Anyone have any best practices which speak to this set up? This company will NOT consider using the cloud therefore aside from purchasing new encryption devices I'm wondering what challenges are in store for trying to manage everything in house.

Personal feelings of how "hard" or "complicated" aside I simply want specifics. Case studies would be fine, if available. Let me know as I'm more than happy to elaborate in any way possible.


tia

 

Install Exchange 2013 CU2 in a lab & ignore hybrid deployment?

$
0
0

We have an existing hybrid deployment of Exchange 2010 SP3 on prem, and took a backup of a production DC to create our new lab.

So, on our lab, I am unable to run prepareschema as it's seeing the hybrid bits in the AD.

"A hybrid deployment with Office 365 has been detected.  Please ensure that you are running setup with the /TenantOrganizationConfig switch. "

The lab is isolated from production, so I was wanting to know what attributes I need to delete from my configuration using ADSI Edit?

I have already cleared out the "Hybrid Deployment" stuff under Configuration/Services/Microsoft Exchange/Organization/Hybrid Deployment...

Thanks

Karl



When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer



My Blog: http://unlockpowershell.wordpress.com
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

PST Capture 2.0 import to O365 extremely slow

$
0
0

I have PST Capture x64 installed and am importing archive PSTs into users' In-place Archive' rather than their normal mailbox.

The first batch of about 8GB (total) all imported without error and in a reasonable timeframe.

The second batch is about 43GB (total) it's been running, without error, for the better part of a week and has only uploaded 4GB.

I have a solid 2Mbit upload to the Internet. Every time I spot check outbound traffic on the PST capture host it is between 125 and 175Kbit/sec--And a portion of that is my remote desktop connection.

I've seen references to http://speedtest.microsoftonline.com/ to the Microsoft Online datacenter, but it has been decommissioned.

Any idea what might be going on?

Viewing all 7129 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>