Hi All,
Does anybody know the link or reference where i can download he entire powrshell cmds by server wise
I know the below link but i a m looking for complete WRT to the servers wise 2010 or 2013
https://technet.microsoft.com/en-us/library/aa998005(v=exchg.150).aspx
Regards
Mthu
Thanks Muthu
I'm experiencing very slow migrations: A 700MB mailbox took 4 hours. I Have 3,800 mailboxes to move, at this rate it will take two years to complete going 24/7/365.
Created by: admin@domain.com
Create time: 2/19/2015 3:14:17 PM
Start time: 2/19/2015 3:14:18 PM
Initial sync time: 2/19/2015 7:21:37 PM
Initial sync duration: 03:59:37
Last synced time: 2/19/2015 7:20:03 PM
6 mailboxes in a batch - 1day, 8hrs, 8min to complete:
Created by: admin@domain.com
Create time: 3/31/2015 1:29:46 PM
Start time: 3/31/2015 1:29:45 PM
Initial sync time: 4/1/2015 7:52:57 AM
Initial sync duration: 1.08:08:41
Last synced time: 3/31/2015 2:33:29 PM
Does anyone have any ideas? This is running from a 2010 DAG to a 2013 DAG, all servers have latest updates, service packs, etc. DAG status is all healthy.
2010 = Update Rollup 8-v2 for Exchange Server 2010 Service Pack 3 (KB2986475) 14.3.224.2
2013 = Exchange Server 2013 Cumulative Update 7 (KB3040856) 15.0.1044.29
What can be done to speed this up?
Tony
How can we migrate users from exchange server 2010 to new exchange server 2013. The two exchange environments are different. Once we installed new exchange server 2013, how do we import all exchange 2010 users mails into new exchange 2013.
Sorry for the long title, but I cant think of any other way of putting it.
We are testing an Exchange 2010 - 2013 upgrade/migration and as part of the testing we migrated a mailbox from 2010 to 2013, and then moved it back to 2010 again - for testing purposes. Now, when we try and migrate it back from 2010 to 2013 we can select it, initiate the job, but within a couple of seconds the number of mailboxes to move drops to 0 (zero) and then the job completes, with no errors at all, but the mailbox is still on the 2010 Information Store.
Now, we dont plan on doing this but is this unique to use, or is this a bug/feature? Exchange 2010 is at SP3 with UR8MK2, and Exchange 2013 is with SP1/UR8.
Thanks
Phil
Phil
I am getting the follwing errors when trying to install exchange 2013 on server 2013. I have already cleared some of the errors reported but the below i seem to be having issues with.
The logon account is the domain administrator and is a member of schema admins, enterprise admins and organization managment.
I have dropped the server off the domain and back on to see if this fixes it but to no avail.
Error:
The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
Error:
Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
Error:
The local domain needs to be updated. You must be a member of the 'Domain Admins' group and 'Organization Management' role group, or 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.LocalDomainPrep.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter on a computer in the domain landlinc and site Hertford, and wait for replication to complete.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
hello,
i'm trying to do a hybrid configuration for exchange 2013 but i get this erreur
ERROR : Échec d'exécution de la sous-tâche CheckPrereqs : Vérification des conditions préalables pour les locataires
Impossible de charger le type 'Microsoft.Exchange.Data.Directory.DirectoryBackendType'à partir de l'assembly 'Microsoft.Exchange.Data.Directory, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
à System.Reflection.RuntimeAssembly.GetType(RuntimeAssembly
assembly, String name, Boolean throwOnError, Boolean ignoreCase, ObjectHandleOnStack type)
à System.Reflection.RuntimeAssembly.GetType(String name,
Boolean throwOnError, Boolean ignoreCase)
à System.UnitySerializationHolder.GetRealObject(StreamingContext
context)
à System.Runtime.Serialization.ObjectManager.ResolveObjectReference(ObjectHolder
holder)
à System.Runtime.Serialization.ObjectManager.DoFixups()
à System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler
handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
à System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream
serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
à System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream
serializationStream, HeaderHandler handler, Boolean fCheck, IMethodCallMessage methodCallMessage)
à Microsoft.Exchange.Data.SerializationTypeConverter.DeserializeObject(Object
sourceValue, Type destinationType)
à Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.Deserialize(PSObject
psObject)
à Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.RunOneCommand[T](String
command, SessionParameters parameters, Boolean ignoreNotFoundErrors)
à Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.RunOneCommandSingleResult[T](String
command, SessionParameters parameters, Boolean ignoreNotFoundErrors)
à Microsoft.Exchange.Management.Hybrid.PowerShellCommonSession.GetOrganizationConfig()
à Microsoft.Exchange.Management.Hybrid.TenantDetectionTask.CheckPrereqs(ITaskContext
taskContext)
à Microsoft.Exchange.Management.Hybrid.Engine.ExecuteSubStep(String
subStepName, ITaskContext taskContext, ITask task, Func`3 substep, Func`4 createException, Boolean throwOnFalse)
I write this post like a last resource . I have a lots doubts in how to add or active CAL User Enterprise on CAL User Standard cause I need activate features like RMS ,in-place eDiscovery & hold , in-place archive and so on .. I have already searched in Web , called to Microsoft but I did receive a successful answer ... I got my brain broken trying to figure out How To do this process ...
I really Appreciate any help to solve this case
Thanks in advance
Nestor Nunes
Client has a root domain and several child domains. Exchange 2007 servers are installed in the root domain. The server roles are distributed - MB, HT and CAS. Some child domains have a single Exchange 2007 server with combined roles and some child domains have a single Exchange 2010 server with combined roles. All Exchange servers in all domains are part of the same Exchange Organization. A migration of mailboxes on root domain MB servers only to Office 365 is planned. A hybrid server Exchange 2013 server will be deployed in the root domain to support the migration. To support this, which child domains should setup.exe /preparedomain:<fqdn> be run against?
Thanks in advance.
Dale
dale.newhart@rbaconsulting.com
Dear Experts,
We are in the middle of testing a migration of an SBS 2011 (running Exchange 2010) over to Server 2012 R2 with Exchange 2013 installed. Trying to install Exchange 2013 on our new 2012 R2 (setup as a replica server in the existing SBS domain) but it always fails with an error:
“One or more servers in the existing organization are running Exchange 2000 Server or Exchange Server 2003. Installation can’t proceed until all Exchange 2000 or Exchange 2003 servers are removed.”
We definitely don’t have any 2000 or 2003 Exchange Servers in our environment. Pre-Requisites Software has been installed. The exisiting SBS 2011 already undergone a swing migration from SBS 2003 – could this be the problem? This migration went flawless and we followed official Microsoft documentation.
Thanks for your advise/help.
Oliver
Hello all,
I have installed Exchange 2013 (CAS Role) on a Windows 2008 R2 server. All the requirements where passed.
After installing and the reboot, I am unable to start the Exchange Toolbox. It gives the following error:
Unhandled Exception in Managed Code Snap-in
FX:{714FA079-DC14-470f-851C-B7EAAA4177C1}
Exception type: System.Runtime.Serialization.SerializationException
Exception stack trace:
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Request request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(IMessageClient messageClient, RequestInfo requestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(SimpleOperationCallback callback)
Any help is appreciated and with kind regards,
Willem-Jan
Dear Experts,
We are in the middle of testing a migration of an SBS 2011 (running Exchange 2010) over to Server 2012 R2 with Exchange 2013 installed. Trying to install Exchange 2013 on our new 2012 R2 (setup as a replica server in the existing SBS domain) but it always fails with an error:
“One or more servers in the existing organization are running Exchange 2000 Server or Exchange Server 2003. Installation can’t proceed until all Exchange 2000 or Exchange 2003 servers are removed.”
We definitely don’t have any 2000 or 2003 Exchange Servers in our environment. Having run an Exchange BPA, we see an old reference to the old SBS 2003 which used to run Exchange 2003. How can we remove entries to this so that we can install Exchange 2013?
Cheers, Oliver
Hi, I have a 2 node Exchange 2013 DAG running CU5 that is having problems and have built 3 new servers to replace the 2. We will create a new DAG. Yesterday I installed Exchange 2013 with CU8 and the install completed successfully with no issues. I have a mailbox on the new server that I can connect to using OWA and send mail with no issues. When I send mail to the mailbox on the new server, the message hangs on either of the existing servers in the Unreachable Domain queue with the error that "There is currently no route to the mailbox database."
Troubleshooting to this point:
Restart Transport service on server1 and server2
Matched configuration for receive connectors between server3 and the other 2.
Messages sent from server3 to a mailbox on server1 or server2 is delivered fine.
Replies and messages sent from server1 or server2 to a mailbox on server3 are not delivered.
What am I missing?
I'm in the middle of migrating from Ex2007 to Ex2013. This is a simple setup with a single server running Ex2007. Port forwarding on the firewall redirects incoming port 443 to Ex2007 for activesync/owa, etc. Exchange 2013 has been installed and configured. Both are coexisting fine. I've moved one mailbox. Exchange 2013 has a valid wildcard SSL certificate.
Now, I change the port forward on the firewall to direct 443 to the new server instead of the old. Remote Connectivity Analyzer connects and verifies that everything is fine for both the migrated mailbox as well as mailboxes that are still on Ex2007. However, for all mailboxes (the migrated one as well as all of the ones still on Ex2007), iPhones repeatedly prompt for password. Entering your password does no good. If you remove the account from the iPhone and add it back then everything is fine. The problem is that we have about 100 phones and doing this to each will be a nightmare. I changed port forwarding back to the old server until we can figure this out. Has anyone else run into this issue? To emphasize, ActiveSync is working fine. I have also found that, instead of removing the Exchange account and adding it back to the iOS device, you can just go into account settings, change a field and save, causing the iOS device to re-verify. After that, you are fine. Any ideas?
Dear Experts,
We are in the middle of testing a migration of an SBS 2011 (running Exchange 2010 SP1) over to Server 2012 R2 with Exchange 2013 installed. The new 2012 R2 has all FSMO roles.
After the successful Installation of Exchange 2013, we are unable to logon to the Exchange Admin Center (https://localhost/ecp). Says bad username or password. My admin is a member of the “Organization Management” Exchange Security Group.
Any ideas? Thanks, Oliver
I built a test environment in preparation for a migration I am doing. I have a 2007 and 2013 set up.
After I moved the test users from the 2007 exchange server to the 2013 server, they can no longer open the public folders still in the 2007 environment. The error is "the server mailbox cannot be opened because this address book entry is not a mail user.".
The Public Folders will eventually be migrated, but I want to ensure users will still have access to them as they are migrated. What step am I missing?
I've just completed a migration of 300 users to Exchange Online from Exchange 2007. I've got an on-prem Hybrid Server (Exchange 2013) along with a DirSync server. I now want to decommission the Exchange 2007 server infrastructure.
The problem is the legacy (Exchange 2003) Email Address Policies on the Exchange 2007 Server. There are several Policies and they are all unwanted including the default Email Address Policy which applies incorrect attributes.
My question is this: Can I simply delete ALL Email Address Policies on the Exchange 2007 server? I can view the policies on the 2013 Hybrid server. They cannot be edited on the 2007 Exchange server without first being upgraded, but I seem to be able to delete them (successfully delete 2 that are known to be obsolete).
I've read TechNet articles about upgrading the Policies but I'm concerned that incorrect attributes will be applied in the process of upgrading. I'd prefer to just delete them. Is there anything I should know before deleting the Default Email Address Policy, or any other Email Address Policy? I assume I can just create a new Default Email Address policy on the Exchange 2013 server once the defunct legacy Policies have been deleted. Is this correct?
Hello,
I am planning the upgrade from a 2003 domain to 2012, but I have an old exchange 2003 server not being used, as I have fully migrated to office365 - with cutover migration (No hybrid deployment).
1. Can I simply turn off the exchange server?
2. If I decommission the exchange server, I assume that all exchange attributes are removed, if so, does this create an issue with upgrading domain to 2012 after? or using DirSync with password sync for office365 later?
Thank you for any input.
Hi,
In my environment we have Exchange 2010 running with 8 servers which is holding 3 mailboxes and rest is HUB /CAS. E2k10 is configured in such a way that users from two different region using two different URLs mail.abc.com & yurmail.abc.com.
I want to consolidate to one URL as mailboxes are 5000 + users, I have F5 load balancer in place, anyone please suggest how to achieve this.
I don't want to disturb any setting at client end and autodiscover, activesync and other things should work.
Hello all,
Currently running a single server installation of Exchange 2013 CU1 on Server 2008 R2.
Checked prerequisites for updating to CU5 and all looked good.
Launched the CU5 install via GUI, not command prompt, which from what I remember when I installed CU1 using the GUI didn't work very well.
Anyway, CU5 failed telling me I have to uninstall CU1. Checked a couple forums and found the same answer.
Tried to uninstall CU1 via Programs and Features, but that failed because it couldn't find a file. Also tried Change and that errors out saying the installation failed and to run setup from an installation media location.
So, I enabled the services that where disabled by either the CU5 install or the CU1 uninstall and started chasing and correcting errors. I've got it to the point that where it looks like everything is working, but I can't send or receive. I'm trying to find an error message somewhere, but I'm not having any luck finding any.
I've tried to use the Queue Viewer and suspend the queue, but nothing shows up in the queue. I've looked at send and receive connectors and they look OK.
I've been up all night and I'm at a loss right now and could really use some help getting this train back on the tracks.
Thank you,
Dennis