Quantcast
Channel: Exchange Server 2013 - Setup, Deployment, Updates, and Migration forum
Viewing all 7129 articles
Browse latest View live
↧

Outlook cannot log on. Verify you are connected to the network...

January 27, 2015, 6:52 pm
$
0
0

I have just installed my first Exchange 2013 deployment.  Small single server install, no Edge Server.  Things seem to have gone pretty well.  I haven't enabled external mail yet but just wanted to do a bit of testing.  I can send test messages and log in via OWA just fine.

However, when I try to connect an Outlook client I get the message: "Outlook cannot log on.  Verify you are connected to the network.  The connection to Microsoft Exchange is unavailable."  I have an internal DNS record for autodiscover and the internal urls in Exchange.

Before I go much further, I will also add that I have not yet installed the cert.  So I do get the certificate error when setting up Outlook.  I think I read that without a valid cert install, Outlook will not connect to Exchange 2013.  Is that true?  I will be finishing things up and installing the cert soon.  Once I do that, do you suspect the above error message will go away?

Also, after the error above, the dialog box appears that lists the server name.  Instead of what I would consider a valid server name, the name shows up as 505ef3b4-5d84-458e-b084-53d45c532bf0@domain.com.  Is that normal?

Thanks for any clarification



↧
Search

Unable to access Exchange 2013 EAC/ECP webpage

February 5, 2013, 7:25 am
$
0
0

Hi All,

Getting extremely frustrated now with a new Exchange 2013 installation on a Windows Server 2012 VM...

After having a lot of problems with the installation (didn't uninstall visual c++ which caused failure, then needed to delete the AD Microsoft Exchange System Objects group due to permission failures, etc) I've now got a fully installed Exchange server. Still, now I cannot figure out how to fix my next problem - Accessing the EAC/ECP.

I've searched every possible web guide/forum thread and the only one which is the same issue I'm having is this one: http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/89c42771-78c9-4d94-88e5-557320eccc71 

Unfortunately, as you can see in that thread, it is still unresolved. 

Current Issue: trying to access https://localhost/ecp (or any other variation) returns a 404 Not Found.

The error page points the physical path to c:\inetpub\wwwroot\ecp however that folder does not exist. I have tried manually changing the IIS site (Exchange Back End) to point its physical path to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp which seems to be valid, however it doesn't work...

Not sure what else to do... HELP!

Oli

↧
↧

Issue Configuring Push Notifications Proxying for OWA for Devices

April 15, 2014, 12:23 pm
$
0
0

I have been attempting to configure Push Notifications per http://technet.microsoft.com/library/jj151815.aspx#bkmk_installmodule

When running the second PowerShell script I get the error 

"New-MsolServicePrincipalCredential : Invalid value for parameter. Parameter name: Credential.EndDate.

At c:\Users\User\Desktop\script2.ps1:25 char:5

*New-MsolServicePrincipalCredential -AppPrincipalId $p,AppPricipalId -Type a"

I do currently have another Federation Trust configured for this account with our test environment. Might this be causing this error? Any help would be appreciated.

↧

Adding a mailbox role to an existing exchange 2013 CAS server

January 24, 2015, 11:54 pm
$
0
0

Hi,

We've recently migrated our on-premise Exchange to Office 365 but we keep management of users in our on-premise Active directory and dirsynced the attribute changes to Office 365. As per Microsoft recommendation, an Exchange server with CAS and Mailbox role should still be on-premise to manage the Exchange attributes. I have two Exchange 2013 servers, one CAS and one Mailbox, I wanted to decommission the Mailbox role server so that I can reuse the storage.

Is it possible to uninstall the Mailbox role and then add the role in the existing Exchange CAS server?

Or, I'll just uninstall Exchange on the 2 servers and setup a new Exchange server with both CAS and Mailbox role?

↧

Migration Exchange 2003 to Exchange 2010

February 1, 2015, 12:51 am
$
0
0
Hi all, I have an environment with the following

2 servers Exchange 2003 (6576381) on Windows Server 2003 R2
My domain is Windows Server 2003 R2 DCs
Forest Functional Level "2000 Mixto"
Functional Level Domain "2000 Mixto"

I will migrate to Exchange 2010, which would be the first steps?

1. Raise Forest Functional Level Domain and Windows Server 2003
2. Insert two new Domain Controllers with Windows Server 2008 R2
3. Install and start migrating to Exchange 2010

My question is if I install the DCs to Windows Server 2008 R2 and supports Exchange Server 2003 6576381


regards

Microsoft Certified IT Professional Server Administrator

↧
↧

ExtensionAttribute not found in Attribute Editor

January 25, 2015, 10:15 pm
$
0
0

Hi,

I can't find any ExtensionAttribute in Attribute Editor, I know it needs extend AD schema, but when I finished "Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms" use Exchange 2013, I still can't see ExtensionAttribute.

↧

Installing Exchange on a domain controller?

January 26, 2015, 1:34 pm
$
0
0

We are very small business firm like less than 10 people. I planning to setup new server. Initially I thought install AD, DNS, DHCP, DC and Exchange on same server. Microsoft not recommending all in my serverInstalling Exchange on a domain controller is not recommended.

So give me suggestion, Is it OK install everything on server for small company like us? or 

create 1 virtual and install Exchange on that server and rest will be on base?. 

 

ItsMeSri SP 2013 Foundation

↧

Resource Mailbox Additional Settings

January 26, 2015, 12:55 am
$
0
0

Hi, 

I'm trying to find out if there is a way for the exchange server to send an email to a user if a Resource Mailbox Room accepts a request. 

i.e, i send a meeting request to Boardroom, it accepts it and send me the accepted response but it then emails someone else that a request has been accepted. 

Any help with this will be greatly appreciated. 

Thanks

William 

↧
Search

Exchange 2013 forced reboots

January 26, 2015, 7:46 am
$
0
0

hi,

I am having some issues with Exchange 2013 servers blue screening and having forced reboots. The managed availability is blue screening the servers about twice a week. We have 12 Exchange 2013 serevrs and 8 of the servers have this issue. 

I can see in the log events 500 and 502 with managed availability

Recovery Action Started. (ActionId=RestartService, ResourceName="Server name removed", Requester=ActiveDirectoryConnectivityRestart, InstanceId=150122.085108.62160.001, ExpectedToFinishAt=2015-01-22T19:55:08.6216099Z

This is very similar to https://support.microsoft.com/kb/2883203 and i have run the overridewith powershell but it is still occuring.

We are running 2013 cu7 on all the servers and are Windows 2012 R2 virtual servers on Hyper-V.

any ideas?

sg

↧
↧

Migrate Exchange 2010 to 2013 External Mail Flow

January 22, 2015, 10:13 pm
$
0
0

Dear All,

I am in the middle of Exchange Server 2010 to 2013 Migration. The scenario is I have single Exchange 2010 server with HUB/CAS/Mailbox and installed new Exchange 2013 with single CAS and single Mailbox server. The internal email flow between Exchange 2010 to 2013 and 2013 to 2010 is working. Having some issues and need assistance to resolve at earliest.

  • The issue with the external mail flow and I want to Exchange 2010 should be configured to send external email while migrating users to Exchange 2013. Once migrate all users to Exchange 2013 then will configure Exchange 2013 send connector.
  • How can I configure single name space of web URL for OWA both on Exchange 2010 to Exchange 2013, if user mailbox is in Exchange 2010 can access same OWA URL as user migrate to Exchange 2013.
  • How to configure SSL certificate, I have single URL certificate this would be enough for OWA, ActiveSync and Anywhere.
  • Is that possible if directly move the Exchange 2010 database to Exchange 2013 database, this will move all users mailboxes in one go or do I need to migrate users mailbox individual or in bulk.

Kindly guide if any thing missing that need to address during start the migration activity.

Thanks in Advance

↧

Domain Change for Exchange 2010 Server

February 2, 2015, 3:15 am
$
0
0

Hi Guys,

We have Single Domain forest with following Microsoft products available. 

Exchange 2010, Lync 2010, Sharepoint, SC 2012 products.

We have a requirement where domain name change need to be performed. Now AFAIK domain rename is not possible after Exchange 2003 server. Hence would need to perform the migration here.. 

Can you please advise which of below approach will be possible

1. Create a new domain in exisiting forest and move users within domain. 

2. Create a new forest with new domain and then perform an intra forest migration.

Will there be any specific cautions than needs to be taken care of. What would be implication for the same?

Regards,

Samy

↧

CU7 and Public Folders broken again for Windows XP users?

December 11, 2014, 11:19 am
$
0
0
Went from SP1 -> CU7 and now XP users are getting the same error they had with CU3. Anyone else having the issue?
↧

Autodiscover issue with existing profiles, but new profile works fine

February 2, 2015, 9:04 am
$
0
0

We are migrating our mailboxes from one forest to another. We are having some issues with existing Outlook profiles. On an existing Outlook profile, after the mailbox is migrated and the SRV record changed to the new server, the client gets the notification about the change made by the administrator, restarts Outlook, gets the Autodiscover redirect warning, gets the prompt for the credentials, then Outlook is trying to connect to the server for 5 minutes then is in the Disconnected state.

When a new profile is created, the Autodiscover works just fine, and the profile is created. If I run a repair on an existing profile, the Autodiscover works just fine and the profile is created.

Looks like it's reaching the Autodiscover.xml, but not able to change the settings on an existing profile, but it's applying the settings just fine for a new or repaired profile.

Any idea what could cause this?

↧
↧

Exchange 2013 and VMware Workstation, network problems

February 2, 2015, 11:19 am
$
0
0

Hi,

So i 'm having this problem with exchange server that is running on VMware workstation 11. I might have put this in the wrong category so if i did please say so. Exchange server 2013 standard is working fine for the most part. I can get access to OWA and ECP on the host machine and the virtual machine on NAT just fine, but obviously i can't get access to if from the external lan network. So i switched to bridged. I can still get internet access from bridged but it says that the dns server (host machine hosts the only dns server) is not responding, so i can't get on exchange at all. Now the dns server works fine on the host machine and the external clients, so i have no idea what this is. Anyway if you can help that would be greatly appreciated. Thank's in advance!

Almost forgot, The host machine i running Windows Server 2012R2 Datacenter and the exchange server running off of VMware is running Windows server 2012 Standard. If you need anymore specs i will post them. Thank's!


↧

From Exchange 2007 to exchange 2013

February 2, 2015, 11:52 am
$
0
0

hi everyone,,

I need a video with brief description of how to deploy exchange 2007 to four servers exchange 2013

please to help,

thnx 

↧
Search

From Exchange 2007 to Exchange 2013

February 2, 2015, 12:04 pm
$
0
0

Hi,

I'm currently looking to move from Exchange 2007 to 2013 on new hardware, I'm not really worry about them coexisting.

Can I disconnect Exchange 2007 from the internet move all the mail boxes over to 2013 and let outlook update the profile.

Just thinking this would be easier and quicker than setting them up to coexist.

Any thoughts are welcome :-)Thanks

Chris

↧

Migrating from GAL segregation to Address Book Policies

February 2, 2015, 1:10 pm
$
0
0
I am planning our migration from Exchange 2007 to Exchange 2013, and am looking at using Address Book Policies (ABP). Years ago, someone here followed the directions inWhite Paper: Configuring Virtual Organizations and Address List Segregation in Exchange 2007. According to Scenario: Deploying address book policies, I need to follow Migrate to Exchange 2010 Address Book Policies from Exchange 2007 Address List Segregation. 

The directions in "Migrate to Exchange 2010 Address Book Policies from Exchange 2007 Address List Segregation" reference Exchange 2010, but I don't see any reason I can't just use a Exchange 2013 server instead. Is that correct?
↧
↧

Migration - SID Question

February 2, 2015, 10:29 am
$
0
0

Hi

This has probably already been asked, but I am unable to find it

We are using a cloud email provider currently, running exchange 2013. we are planning to migrate to Office 365 Exchange Plan.

I am absolutely fine with the migration plan, however previously when deleting a user on our internal active directly, and the corresponding cloud mailbox, when re creating the same user a few months later everyone had to delete that user from their cache settings in Outlook to be able to email her again!.

I am therefore concerned that anyone with our cached details for any of our employees will no longer be able to email us post migration, and will need to re enter the email address from scratch.

From what ive read it appears to be an "internal" issue only, but I want to check this.

Can someone enlighten me?

Thanks,

Matt

↧

Updating Exchange 2013 CU1 to CU7

February 2, 2015, 11:55 pm
$
0
0

Hey,

I'm just standing before update of our stand alone Exchange 2013 CU1 server to CU7. Is it OK to do this update this way or should I start with patching lower CU's like SP1 and then CU7. Are there going to be serious problems or no at all? I have to do this update on production system - unfortunately no test environment is possible in my case.

Do you recommend any advanced process during installation of this CU that differs from manual on TechNet? Are there any critical post-update todo's? We are using OWA (with IIS modified to support only SSL access, ActiveSync). 

Thanks, best regards

Matt

↧

Can't migrate Public Folders from Exchange 2010 to 2013

October 23, 2014, 12:23 pm
$
0
0

I'm following the procedure as per this Microsoft article:

http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx

However at the New-PublicFolderMigrationRequest step (step 5 - migrate Exchange 2010 folders)  I'm getting the error at bottom.  Anybody know what could be causing this?  It certainly seems to be able to access ATLAS.  I've tried using atlas.es.tv, tried using just the name of the PF DB, nothing works.

[PS] C:\Windows\system32>New-PublicFolderMigrationRequest -SourceDatabase (Get-PublicFolderDatabase -Server ATLAS) -CSVD
ata (Get-Content "C:\PFscripts\foldermailbox.csv" -Encoding Byte)
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=-2147221231)
Diagnostic context:
    Lid: 49064   dwParam: 0x1
    Lid: 37288   StoreEc: 0x6AB
    Lid: 49064   dwParam: 0x2
    Lid: 49191   EMSMDBMT.EcDoConnectEx called [length=191]
    Lid: 48679   EMSMDBMT.EcDoConnectEx returned [ec=0x80040111][length=56][latency=0]
    Lid: 45169   StoreEc: 0x80040111
    Lid: 50544   ClientVersion: 15.0.913.22
    Lid: 52080   StoreEc: 0x80040111
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 22086
    Lid: 27206
    Lid: 39869
    Lid: 56893   StoreEc: 0x8004010F
    Lid: 44989
    Lid: 24684
    Lid: 20076   StoreEc: 0x80040111
    Lid: 29100
    Lid: 20396   StoreEc: 0x80040111
    Lid: 9486    StoreEc: 0x80040111
    Lid: 24492
    Lid: 18348   StoreEc: 0x80040111
    Lid: 26540   dwParam: 0xE0003
    Lid: 22444   dwParam: 0xC30001
    Lid: 1750    ---- Remote Context End ----
    Lid: 51152
    Lid: 52465   StoreEc: 0x80040111
    Lid: 60065
    Lid: 33777   StoreEc: 0x80040111
    Lid: 59805
    Lid: 52487   StoreEc: 0x80040111
    Lid: 19778
    Lid: 27970   StoreEc: 0x80040111
    Lid: 17730
    Lid: 25922   StoreEc: 0x80040111
    + CategoryInfo          : NotSpecified: (:) [New-PublicFolderMigrationRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=MB2-2013,RequestId=2dcefa76-98ad-4a2e-bb33-237d7fd795fd,TimeStamp=10/23/2014 7:1
   7:17 PM] [FailureCategory=Cmdlet-RemoteTransientException] 4A6EEF8C,Microsoft.Exchange.Management.RecipientTasks.N
  ewPublicFolderMigrationRequest
    + PSComputerName        : mb2-2013.es.tv

----------- Ron E Biggs Chief Tech Officer Entertainment Studios

↧
Viewing all 7129 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>