Migration Planning: What will happen with clients when changing namespace?

January 12, 2015, 12:36 am

≫ Next: Exchange 2007 to 2013 Public Folder Migration test user doesn't connect to 2013 folders

≪ Previous: Autodiscover internal / external and CSRs

Hello,

We are planning to upgrade our EX2010 enviroment to EX2013.

Sadly our namespace in EX2010 is right now owa2.domain.com. The name owa2 is coming from last migration between ex2003 and ex2010. I'd like to remove this minor flaw if possible.

But what will happen with all the clients and mobile devices which are right now bound to owa2.domain.com? Is it possible to change the name back to owa.domain.com without manual interaction with the clients?

Kind Regards

↧

Exchange 2007 to 2013 Public Folder Migration test user doesn't connect to 2013 folders

January 11, 2015, 12:08 pm

≫ Next: Microsoft Exchange Setup failing

≪ Previous: Migration Planning: What will happen with clients when changing namespace?

The basic symptom is this: The PF migration appears to work perfectly but when trying to assign a user to test the new folders it still attempts to connect to the old folders even though the users's DefaultPublicFolderMailbox is set to the new server. Connection status in Outlook still shows a connection to the 2007 server.

I'm using the TechNet PF migration article: http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx

This is a single server migration from 2007 SP3 UR10 to 2013 CU5 Standard. The migration of mailboxes is complete with no errors and I'm trying to move the 100mb in public folders over to the 2013 server. Using several guides but once I've had problems I've switched to using the "standard" TechNet article as follows. I am creating only one PF mailbox since there are 10 folders and 100mb in data roughly. My Mailboxmap.csv file shows only the following:

"TargetMailbox","FolderPath"
"PFRoot","\"

The entire PF migration steps work flawlessly with no errors that I can see at all. I've rolled back and ran this process a half dozen times now to see if I've missed something.

I'm stuck on Step 8: Item #2 testing the migration from the test user in Outlook.

I've assigned the DefaultPublicFolderMailbox properties as that Item #2 shows me to do and if I use Get-Mailbox (test user) | Select DefaultPublicFolderMailbox command I see the new PFRoot mailbox listed as the default. However, the test user can't access the public folders at all. If I look in EAC I still see no public folders listed at all. If I use this guide:

http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part2.html

It shows after setting "Set-Mailbox PFRoot -PublicFolder -IsExcludedFromServingHierarchy $False" I should be able to see the public folders in EAC. However, I can see the PF mailbox (PFRoot) but no public folders at all in EAC.

Where do I go from here? Even though I have no errors I don't want to complete the migration because the test isn't working.

Jeremy Regehr

↧

Microsoft Exchange Setup failing

January 12, 2015, 5:04 am

≫ Next: User cannot open Outlook post migration of mailbox from Exchange 2010 to 2013

≪ Previous: Exchange 2007 to 2013 Public Folder Migration test user doesn't connect to 2013 folders

Hi there,

I am attemping to install Exchange 2013 on Server 2012 R2 but I keep getting the below message.

Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema0.ldf")

" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostWindows2003_schema0.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.E-NET\AppData\Local\Temp\1\ldif.err'".

Any ideas?

↧

User cannot open Outlook post migration of mailbox from Exchange 2010 to 2013

January 12, 2015, 7:00 am

≫ Next: Server Upating

≪ Previous: Microsoft Exchange Setup failing

I am experiencing an odd issue, we are running in coexistence mode at the moment with Exchange 2010 and 2013. We are in the process of moving user mailboxes from 2010 to 2013. Strangely some users move across fine without any issues and are then able to open outlook and continue working. However other users cannot open Outlook. I have also tried opening OWA post the move to 2013 for the affected user but get the attached error. The move completes successfully, for the moment I am moving the affected users back to 2010 so they can continue working. I have read other articles referring to ensuring that the inheritable exchange permissions are enabled for the user. This checked all permissions for users are identical. Anyone seen anything similar before?

↧

Server Upating

December 29, 2014, 4:44 pm

≫ Next: All Exchange 2007 servers in the organization must have Exchange 2007 SP3 or later installed.

≪ Previous: User cannot open Outlook post migration of mailbox from Exchange 2010 to 2013

We have two Exchange 2013 cu3 Servers on Server 2012. We want to migrate to Exchange 2013sp1 (cu7) and Server 2012r2. The servers are in a DAG at this time, and we would like to add a Server with the Edge Transport Role. I know that I will need to bring in New r2 servers, and that I will need to disable the DAG because the servers will be different OSs. But what would be the best and most time efficient steps to get through this migration of updating to the latest Exchange and the operating system. Thank you for any assistance with this.

↧

All Exchange 2007 servers in the organization must have Exchange 2007 SP3 or later installed.

January 8, 2015, 11:41 am

≫ Next: Receive Connector Setup for Single Server

≪ Previous: Server Upating

I'm getting that error in readiness check, but we don't have an exisiting exchange install. Our email is currently hosted. I believe my predecessor looked into setting up exchange and we have a exchange 2007 disc, but I don't any installation on the server mentioned in the error.

↧

Receive Connector Setup for Single Server

January 8, 2015, 8:51 am

≫ Next: Cross Forest Migration 2010->2013, FIM GALSync and moving to Resource Forest

≪ Previous: All Exchange 2007 servers in the organization must have Exchange 2007 SP3 or later installed.

Hi I am installing Exchange 2013 SP1 in a test environment. This server will coexist with an Exchange 2007 server.

Both the Exchange 2013 server and the 2007 server are standalone servers with all roles installed. I understand that the mail flow has changed some in 2013.

On my current Exchange 2007 server, the Client and Default Connectors are disabled. I then have two additional connectors that were created, the 1st receives incoming internet mail from our spam gateway, and the 2nd receives mail from a few select internal clients that send via SMTP (example: printers and copiers, server application alerts)

My question is regarding the setup of receive connectors on the new 2013 servers. I have already duplicated the 2 connectors that are on 2007. Which of the default receive connectorscan I disable on Exchange 2013? thanks

↧

Cross Forest Migration 2010->2013, FIM GALSync and moving to Resource Forest

January 12, 2015, 1:41 pm

≫ Next: Exchange 2010 to 2013 OAB

≪ Previous: Receive Connector Setup for Single Server

Hi,

We have an Exchange 2010 in place in our current single Forest AD 'EX2010'. In here are our Users, Computers, Servers.

We have a new Forest in place, which is essentially a Resource Forest, with two way trust to EX2010. In here we are deyploying new technology only: Exchange 2013, Lync 2013, SharePoint 2013 etc.

now we want to migrate from our old EX2010 to the new EX2013, with temporary coexistance. I have FIM in place so all contacts are created in the 2013 domain, however when I actually migrate a User Mailbox from 2010 to 2013. I get a linked mailbox since my users still reside in the EX2010 domain. after that FIM fails for the migrated user since the contact and user account cannot coexist in the Ex2010 domain.

How do i resolve this situation?

thanks to anyone who can point me in the right direction.

↧

Exchange 2010 to 2013 OAB

January 13, 2015, 3:37 am

≫ Next: Unable to update Exchange 2013 from CU5 to CU7

≪ Previous: Cross Forest Migration 2010->2013, FIM GALSync and moving to Resource Forest

Ive finally had a bit of time to play with Exchange 2013! Ive got a lab setup with Exchange 2010 and Ive installed Exchange 2013.

Ive noticed that with my config I have all urls currently pointing to exchange 2010 and it proxies requests dependent on where your mailbox is. All external stuff is pointing to 2013 eg OWA and the 2013 FBA appears and 2013 and 2010 users can login.

My question is, how does the OAB work? I tried to use the Default Offline Address Book (ex2013) for the 2013 DBs that was built during install but I get an error downloading OAB in outlook (internal and external). When I use the ex2010 offline address book all is ok. Ive also noticed the guid folder does not exist for 2013 under Default and Backend websites (this is true even if I try to create a new OAB). I created a standalone Exchange 2013 server (no 2010) and the OAB stuff seemed ok.

Does the OAB not get proxied? During migration do you still use the 2010 OAB until the end and then transfer it?

Thanks in advance

↧

Unable to update Exchange 2013 from CU5 to CU7

January 6, 2015, 3:11 pm

≫ Next: DNS Question....

≪ Previous: Exchange 2010 to 2013 OAB

I've tried unsuccessfully to update my Exchange from CU5 to CU7.

There is only one multi-roled server and whilst PrepSchema, PrepAD and PrepDomain all successfully finish, when it comes to the actual install, it fails on the pre-requisite checks without much insight into why.

I've tried running the installer from PS, cmd, elevated cmd, after reboot, after windows updates, etc but am unable to pass the pre-req checks. Checking the exchange install logs:

[01/06/2015 13:49:06.0905] [0] Setup will run the task 'Start-PreConfiguration'
[01/06/2015 13:49:06.0905] [1] Setup launched task 'Start-PreConfiguration -Mode 'BuildToBuildUpgrade' -Roles 'LanguagePacks','BridgeheadRole','FrontendTransportRole','ClientAccessRole','UnifiedMessagingRole','MailboxRole','AdminToolsRole','CafeRole''
[01/06/2015 13:49:09.0967] [1] [ERROR] Object reference not set to an instance of an object.
[01/06/2015 13:49:09.0983] [1] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
[01/06/2015 13:49:10.0764] [1] [ERROR] Object reference not set to an instance of an object.
[01/06/2015 13:49:10.0764] [1] [ERROR] Object reference not set to an instance of an object.
[01/06/2015 13:49:10.0780] [0] [ERROR] Exception has been thrown by the target of an invocation.
[01/06/2015 13:49:10.0780] [0] [ERROR] Object reference not set to an instance of an object.
[01/06/2015 13:49:10.0780] [0] [ERROR] Object reference not set to an instance of an object.
[01/06/2015 13:49:10.0780] [0] CurrentResult SetupLauncherHelper.loadassembly:444: 1
[01/06/2015 13:49:10.0780] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[01/06/2015 13:49:10.0780] [0] CurrentResult main.run:235: 1
[01/06/2015 13:49:10.0780] [0] CurrentResult setupbase.maincore:396: 1
[01/06/2015 13:49:10.0780] [0] End of Setup
[01/06/2015 13:49:10.0780] [0] **********************************************

From the Watson log:

[01/06/2015 13:49:06.0436] [0] The locally installed version is 15.0.913.22.
[01/06/2015 13:49:06.0436] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[01/06/2015 13:49:06.0530] [0] Setup is determining what organization-level operations to perform.
[01/06/2015 13:49:06.0530] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[01/06/2015 13:49:06.0577] [0] RootDataHandler has 1 DataHandlers
[01/06/2015 13:49:06.0577] [0] Languages
[01/06/2015 13:49:06.0577] [0] Mailbox role: Transport service
[01/06/2015 13:49:06.0577] [0] Client Access role: Front End Transport service
[01/06/2015 13:49:06.0577] [0] Mailbox role: Client Access service
[01/06/2015 13:49:06.0577] [0] Mailbox role: Unified Messaging service
[01/06/2015 13:49:06.0577] [0] Mailbox role: Mailbox service
[01/06/2015 13:49:06.0577] [0] Management tools
[01/06/2015 13:49:06.0577] [0] Client Access role: Client Access Front End service
[01/06/2015 13:49:06.0592] [0] Validating options for the 7 requested roles
[01/06/2015 13:49:06.0592] [0] UpgradeModeDataHandler has 17 handlers and 17 work units
[01/06/2015 13:49:06.0655] [0] Performing Microsoft Exchange Server Prerequisite Check
[01/06/2015 13:49:06.0889] [0] **************
[01/06/2015 13:49:06.0905] [0] Setup will run the task 'Start-PreConfiguration'
[01/06/2015 13:49:06.0905] [1] Setup launched task 'Start-PreConfiguration -Mode 'BuildToBuildUpgrade' -Roles 'LanguagePacks','BridgeheadRole','FrontendTransportRole','ClientAccessRole','UnifiedMessagingRole','MailboxRole','AdminToolsRole','CafeRole''
[01/06/2015 13:49:09.0967] [1] [ERROR] Object reference not set to an instance of an object.
[01/06/2015 13:49:09.0983] [1] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Unfortunately this is about as detailed as it gets. I can't figure out why it's thrown the error and there's nothing in the event logs.

Has anyone encountered this before? Or would anyone be able to point me to some more detailed logs?

↧

DNS Question....

January 12, 2015, 12:03 pm

≫ Next: Migration from SBS2003 to Server 2012R2 Exchange issues

≪ Previous: Unable to update Exchange 2013 from CU5 to CU7

Hello,

I am currently migrating from Exchange 2007 to Exchange 2013. My Exchange 2013 is up and running. However, my certificate is not installing correctly. Could it be that there is no public DNS entry for my Exchange 2013 box? I do not handle my own DNS.

Thanks

↧

Migration from SBS2003 to Server 2012R2 Exchange issues

January 12, 2015, 12:50 pm

≫ Next: Exchange 2013 migration between AD sites

≪ Previous: DNS Question....

We are trying to migrate from SBS2003 to 2012R2 with Exchange 2010 with the ultimate goal of upgrading then to Exchange 2013. Trying to follow all the migration documents we have integrated the Server 2012 and Active Directory appears fine. the issue is when we try to open the Exchange Management Console or Shell, we receive the error "Connecting to remote server "Servername.Domainname.local" failed with the following message: The WinRM client received an HTTP status Code of 403 from the remote WS-Management service. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.3 (Build123.4)''.

We can add the exchange management powershell snapin manually and verify the Exchange accounts are present using the Get-CASmailbox command. Running EMTshooter.ps1 gives a result of Your Powershell Virtual Directory is M.I.A.

Any help on this would be appreciated. I believe this is an issue with IIS but cannot seem to locate the problem.

We have not yet transfered the FSMOs from the 2003 SBS as we wanted be be sure Exchange 2010 was functional first.

Thanks for any assistance.

↧

Exchange 2013 migration between AD sites

January 13, 2015, 8:25 am

≫ Next: Cannot open Exchange Management Shell on CAS Servers

≪ Previous: Migration from SBS2003 to Server 2012R2 Exchange issues

Hello,

I am preparing a migration from one Exchange 2013 Cu6 server to another 2013 CU6 server in the same domain in a different AD site. Each server is HT and MB server, hosting its own DB. There is no DAG between the 2 servers.

I am planning to use coexistence between the servers during the migration when I move mailboxes from one server to the other. The move should be transparent to the users. Outlook should detect the move and find it automatically.

I configured one namespace for all URLs, identical on both servers like "mail.organization.nl" for AS, OA, OWA, ECP and autodiscover.

Would this work? I read here it will: The article is referrning to a DAG spanned over 2 sites, which I do not have.

http://blog.netwrix.com/2014/03/21/configuring-exchange-2013-for-site-resilience-2/

Any advice on performing this migration without issues?

Thanks

↧

Cannot open Exchange Management Shell on CAS Servers

January 13, 2015, 8:54 am

≫ Next: Event ID 106, Event ID 1039

≪ Previous: Exchange 2013 migration between AD sites

When trying to open EMS on all CAS Servers, an error is received -

"The WinRM Shell client cannot process the request. The shell handle passed to the WSMan Shell function is not valid. The shell handle is valid only when WSManCreateShell function completes successfully. Change the request including a valid shell handle and try again."

Most people have solved this by going into the bindings of the Exchange Back End site in IIS and assigning a certificate. There is already a certificate assigned, so that is not the problem. We are using a wildcard certificate, but I don't think that is the problem because I have reassigned the default self signed cert as well as creating a new certificate with the FQDN of the server as the CN and it produces the same results.

I am able to "fix" the error by changing the path of "PowerShell" under the Default Web Site in IIS from "C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\PowerShell" to "C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PowerShell", but that is not a good solution as I am sure it can cause other problems.

We are running Exchange 2013 CU5. We have four CAS servers spanning two sites (two in each site) and they are all running Server 2008 R2 Standard. All four CAS servers are having the problem. This is an environment I inherited, so I can't say when the error started happening (after initial installation, applying an update, etc.).

Any help is greatly appreciated!

↧

Event ID 106, Event ID 1039

January 13, 2015, 12:22 pm

≫ Next: Switching from external Email server to Exchange, Understanding Dis-Joint, and a little help please

≪ Previous: Cannot open Exchange Management Shell on CAS Servers

Hi!

I have a clean installed ex2013 server (OS Windows Server 2012r2) and an existing ex2010 server. I intstalled ex2013sp1, after update to CU7. Every time when I reboot the new exchanger I'm getting six error in the application log (Event ID 106 and 1039). The error message language is english and hungarian. I read many articles, but i can't find solution. Is anybody there who has the same issue?

Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

568 csrss

960 svchost

1352 hostcontrollerservice

5192 MSExchangeThrottling

1708 MSExchangeHMHost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

4080 MSExchangeFrontendTransport

2880 taskhost

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

4452 MSExchangeMailboxReplication

900 dwm

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

0 Idle

Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Anti-Malware Datacenter Perfcounters : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange anti-malware datacenter perfcounters. Error Details: 2

a következő helyen: Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

568 csrss

960 svchost

1352 hostcontrollerservice

5192 MSExchangeThrottling

1708 MSExchangeHMHost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

4080 MSExchangeFrontendTransport

2880 taskhost

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

4452 MSExchangeMailboxReplication

900 dwm

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

0 Idle

a következő helyen: Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

568 csrss

960 svchost

1352 hostcontrollerservice

5192 MSExchangeThrottling

1708 MSExchangeHMHost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

4080 MSExchangeFrontendTransport

2880 taskhost

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

4452 MSExchangeMailboxReplication

900 dwm

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

0 Idle

a következő helyen: Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Performance counter updating error. Counter name is Current Requests Pending, category name is MSExchange LiveIdBasicAuthentication. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.get_RawValue()

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

7676 svchost

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

7992 w3wp

7452 WmiApSrv

568 csrss

960 svchost

1352 hostcontrollerservice

7852 WmiPrvSE

5192 MSExchangeThrottling

1708 MSExchangeHMHost

8824 svchost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

7432 FSCConfigurationServer

4080 MSExchangeFrontendTransport

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

9188 w3wp

7832 VSSVC

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

8272 rundll32

4452 MSExchangeMailboxReplication

900 dwm

7596 TiWorker

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

9940 w3wp

8608 w3wp

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

7604 svchost

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

6552 rundll32

6744 TrustedInstaller

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

8152 sppsvc

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

9280 w3wp

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

7556 svchost

0 Idle

Performance Counters Layout information: FileMappingNotFoundException for category MSExchange LiveIdBasicAuthentication : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange liveidbasicauthentication. Error Details: 2